Thanks, just need to figure out the right temperature as well.
I had it at 360, I first had it lower but I felt I was holding it way too long on the pcb before getting any melting happening. Most likely more owing to bad technique though...
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: How do you normally pay for purchases in stores?
Home Automation - Smartkit
- Thread starter Dolby
- Start date
I had it at 360, I first had it lower but I felt I was holding it way too long on the pcb before getting any melting happening. Most likely more owing to bad technique though...
TedLasso
Executive Member
- Joined
- Feb 23, 2016
- Messages
- 5,257
- Reaction score
- 2,906
My dad has one like that, must be over 20 years old and still working!
SauRoNZA
Honorary Master
Don’t know what you are complaining about, looks pretty damn decent to me.
Would have assumed it came from the factory like that.
Mine is infinitely kakker with a cheap **** iron. Back in the day when I had access to a Magnum and other tools it did make all the difference.
Terminal block is a good idea I never even considered though. I just hard wired it all.
Thanks man...
I put the terminal block on as I may need my alarm company to come out and wire and programme the alarm outputs - depending on how far I get. Would rather they just connect via terminal than hard wire it.
Some unusual automation kit
Automate Your Life's Amazon Page - Unique Smart Home Gems
Shop recommended products from Automate Your Life on Amazon.com. Learn more about Automate Your Life's favorite products.
www.amazon.com
Found the switchbot interesting. Must be honest, initially thought its silly. Just get a smart switch or smart plug.
But could be useful on certain appliances.
Hmm can switch on but how to switch off? Two per rocker switch? Unless of course a press button.
This will soon be redundant given IoT developments but great for old houses and appliances.
Update - a review
www.androidpolice.com
community.smartthings.com
But could be useful on certain appliances.
Hmm can switch on but how to switch off? Two per rocker switch? Unless of course a press button.
This will soon be redundant given IoT developments but great for old houses and appliances.
Update - a review
SwitchBot review: Simple automation for any switch or button in your home
www.androidpolice.com
2020 Switchbot Review ( robot button pusher), integration through IFTTT or SmartThings app
Sometimes all you need is a button push. 😉 Whether it’s to eject a DVD, open a microwave door, start a dumb air purifier, or start an otherwise really smart television, there are some devices that require a button push. There are even some smart devices, like the aforementioned televisions...
community.smartthings.com
Last edited:
Geewiz actually has the switches and hub. Thought of getting some to play around with but just too expensive.
www.geewiz.co.za
www.geewiz.co.za
Update see review below
community.smartthings.com
Smart Home Accessories
www.geewiz.co.za
Switchbot Hub Plus ( with Alexa Google Home Siri IFTTT )
Pair your air conditioner, TV, and any appliance to the Hub Plus with the SwitchBot App. Toss out all IR remotes, enjoy the convenience at fingertips. Control your entire smart home without lifting a finger. Ask SwitchBot to do with Alexa, Google Assistant and more. Integrate the Hub Plus to...
www.geewiz.co.za
Update see review below
2020 Switchbot Review ( robot button pusher), integration through IFTTT or SmartThings app
Sometimes all you need is a button push. 😉 Whether it’s to eject a DVD, open a microwave door, start a dumb air purifier, or start an otherwise really smart television, there are some devices that require a button push. There are even some smart devices, like the aforementioned televisions...
community.smartthings.com
Last edited:
Interesting about the switchbot hub:
You could also use SwitchBot Hub Plus (the Hub Plus) infrared feature to mimic signals of your remotes of air conditioner, TV, fan, speaker, etc. for over 5,000 brands - and more on the way.
Just wondering how that works in practice and range of these BLE signals? My bluetooth headphones lose signal between bedroom and lounge, so ...
You could also use SwitchBot Hub Plus (the Hub Plus) infrared feature to mimic signals of your remotes of air conditioner, TV, fan, speaker, etc. for over 5,000 brands - and more on the way.
Just wondering how that works in practice and range of these BLE signals? My bluetooth headphones lose signal between bedroom and lounge, so ...
alqassam
Expert Member
- Joined
- Aug 11, 2014
- Messages
- 4,254
- Reaction score
- 828
I just ordered some broadlink RM minis for R300 incl shipping from banggood.Geewiz actually has the switches and hub. Thought of getting some to play around with but just too expensive.
Smart Home Accessories
Switchbot Hub Plus ( with Alexa Google Home Siri IFTTT )
Pair your air conditioner, TV, and any appliance to the Hub Plus with the SwitchBot App. Toss out all IR remotes, enjoy the convenience at fingertips. Control your entire smart home without lifting a finger. Ask SwitchBot to do with Alexa, Google Assistant and more. Integrate the Hub Plus to...
Update see review below
2020 Switchbot Review ( robot button pusher), integration through IFTTT or SmartThings app
Sometimes all you need is a button push. 😉 Whether it’s to eject a DVD, open a microwave door, start a dumb air purifier, or start an otherwise really smart television, there are some devices that require a button push. There are even some smart devices, like the aforementioned televisions...
This can control aircons and TVs etc
Busy flashing my first sonoff sv with the ftdi I just got now:https://www.pishop.co.za/store/geekcreit-ft232rl-ftdi-usb-to-ttl-serial-converter-adapter-module
I've just one question, as I've seen different tutorials say different things - regarding pins:
Sonoff SV <-> FTDI (jumper set to 3.3V)
GND <-> GND
TX <-> RX
RX <-> RX
3V3 <-> VCC (is this correct? I see there's a 3V3 on the FTDI chip as well, that doesn't have any header pin on it)
I've just one question, as I've seen different tutorials say different things - regarding pins:
Sonoff SV <-> FTDI (jumper set to 3.3V)
GND <-> GND
TX <-> RX
RX <-> RX
3V3 <-> VCC (is this correct? I see there's a 3V3 on the FTDI chip as well, that doesn't have any header pin on it)
Yes that is correct. Just be sure to press the button to put it into flashing mode before connecting up the GND or VCC pins.
Could I also have everything connected and then plug in the usb while holding down the button?
Yes, that works too.
Steamy Tom
Executive Member
- Joined
- Jan 23, 2019
- Messages
- 9,864
- Reaction score
- 6,103
thats what i do
chickenbeef
Honorary Master
TX <-> RX
RX <-> TX
Also, if it doesn't work swap it around. The R25 FTDI I got from Banggood seems to have the TX/RX mislabelled so I need to connect TX-TX and RX-RX lol. Took ages to figure out.
Last edited:
I successfully flashed 2 SV's, to Tasmota 8.2. Haven't configured them yet, but they're on my wifi and can toggle them on/off.
Had a couple of silly issues:
1. The USB cable I was using at first powered the FTDI, but it didn't show up in Arduino IDE. Dug another out and it worked fine.
2. The 12v power supply I've been using suddenly also gave in. Spend 20 minutes thinking I bricked the SV until I got my multimeter out and saw it was dead.
Other than that, pretty straight forward. Just need to document what I did, because I'll be googling it again in 2 weeks time.
Had a couple of silly issues:
1. The USB cable I was using at first powered the FTDI, but it didn't show up in Arduino IDE. Dug another out and it worked fine.
2. The 12v power supply I've been using suddenly also gave in. Spend 20 minutes thinking I bricked the SV until I got my multimeter out and saw it was dead.
Other than that, pretty straight forward. Just need to document what I did, because I'll be googling it again in 2 weeks time.
Steamy Tom
Executive Member
- Joined
- Jan 23, 2019
- Messages
- 9,864
- Reaction score
- 6,103
i told you this stuff is easy bra, this week you flashing and soldering already. /sniff sniff they grow big so fast
Good dads always recognize the potential in their kidsi told you this stuff is easy bra, this week you flashing and soldering already. /sniff sniff they grow big so fast