Home Automation - Smartkit

Help..
I am looking for a 433MHz button that doesn't look super cheap, I bought a bunch of TX's in black and I am one button short in my new house. (Curse last minute changes)
Those buttons chew batteries. I have 2 different branded ones, one being a Sonoff glass switch and the batteries don't last past 2 months and that is with minimal use.
 
Hi @ Tinuva.

Shelly EM will also fit into a dB board and is certified for installation and use in South Africa.

Similarly with Shelly 1 PM, yet limited to a contact of 16 amps.
I would not recommend 16A for geyser? I know some do use it but prefer margin of safety.
 
Last edited:
I would not 16A recommend for geyser? I know some do use it but prefer marhin of safety.
I agree. I had a 20A dumb relay controlling my geyser and it burnt after about a year. Fortunately I smelt the plastic burning and isolated it. Could have just been a dud relay but I won't chance it again. The connections were still tight when I removed it so it wasn't a loose connection.

That CBI relay rated at 30A will be fine.
 
My sparky showed me this today


30 amps... Don't know how customisable it is, but it's about time cbi came to the party
Been around for more than a year (probably even longer) already. Posted it long ago but as usual myBBers convinced that nothing good exists locally just ignored the post.
 
Hi

This control panel controls a cool breeze evaporative cooler that is mounted on my roof.
Unfortunately, it’s not wifi enabled.


I would love to be able to control this from my smartphone.

Any ideas ???
f23ae2940ab6ab95b697a56137720267.jpg
 
If infrared then just get a remote controller like one below. Most popular is broadlink brand ones.

[US$16.14 30% OFF]Bakeey Universal Infrared IR+WIFI Remote Controller Receiver Air Conditioner TV Assistant Compatible with Tuya Smart Life Work with Google Home Alexa Echo Smart Home from Consumer Electronics on banggood
 
Been around for more than a year (probably even longer) already. Posted it long ago but as usual myBBers convinced that nothing good exists locally just ignored the post.
How much is that CBI controller?
 
How much is that CBI controller?
Currently R472 (advertised as R672) at Liteglo shop. I ordered on Friday and it was delivered in the last hour.

Will test tonight to see if I am stuck with ewelink on it or can flash it.

Been around for more than a year (probably even longer) already. Posted it long ago but as usual myBBers convinced that nothing good exists locally just ignored the post.
Wonder how we missed it...
 
Currently R472 (advertised as R672) at Liteglo shop. I ordered on Friday and it was delivered in the last hour.

Will test tonight to see if I am stuck with ewelink on it or can flash it.


Wonder how we missed it...
Hi @Tinuva , before you flash the device, would it be possible to confirm if it works with the eWelink app? I'm really not looking for another app to control my HA devices (primarily SONOFF) but the higher current this device handles makes me want one!
 
Hi @Tinuva , before you flash the device, would it be possible to confirm if it works with the eWelink app? I'm really not looking for another app to control my HA devices (primarily SONOFF) but the higher current this device handles makes me want one!
I will see. Ideally I want to ensure I can flash first, because I dont want the device to upgrade and make and take away the opportunity of an easy flash.

The playing will start tonight after work.

FAQ mentions: The CBI Home App is also compatible with Smart Life or Tuya Smart Devices.
So not sure if that means it is compatible with SmartLife/ewelink etc.
 
Hi @Tinuva , before you flash the device, would it be possible to confirm if it works with the eWelink app? I'm really not looking for another app to control my HA devices (primarily SONOFF) but the higher current this device handles makes me want one!
ok so the tuya convert didn't happen. It connects to the AP but never loads on to intermediate firmware and I didn't see any obvious issues after checking the logs.

then tried in the ewelink smartlife app, and well either I dont know what I am doing but it didnt work in either the quick ewelink mode nor the compatibility mode.

Will spend more time on it later and also test another device I still have for tuya convert.
 
ok so the tuya convert didn't happen. It connects to the AP but never loads on to intermediate firmware and I didn't see any obvious issues after checking the logs.

then tried in the ewelink smartlife app, and well either I dont know what I am doing but it didnt work in either the quick ewelink mode nor the compatibility mode.

Will spend more time on it later and also test another device I still have for tuya convert.
Im interested to see how it works out, I know I could just use the HA Tuya integration but Im not a fan of stock firmware.
I think I should order one of these and see what I can do with it.
 
Im interested to see how it works out, I know I could just use the HA Tuya integration but Im not a fan of stock firmware.
I think I should order one of these and see what I can do with it.
Its definitely a Tuya device which probably uses the new format that doesn't work in Tuya-convert yet.
Was able to add it in Smartlife Tuya app.
It shows up as an ASC and even the help link on it in the app links to the CBI home page.
So at least do not need to use the CBI Home app.

Next step will be to see how to open it up. Looks possible, even though it also looks well built.
 
Top
Sign up to the MyBroadband newsletter
X