Please drop me a pm with your email so I can add you to my spreadsheet of IPv6 clients.
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: Which is the most hair-raising South African mountain pass you've driven?
IPv6 Roll Out
- Thread starter AfriNatic
- Start date
Please drop me a pm with your email so I can add you to my spreadsheet of IPv6 clients.
You should select DHCP on this option.
Thank you, any other settings I would need to change or as simple as enabling it to DHCP?
Thanks for the quick response!
Should be as simple as enabling DHCP and then it should auto allocate the prefix.
klipdrifter
Senior Member
Hi there peeps
So just a quick question. If I enable IPV6 on my router should I automatically get an Dynamic IP or must it be requested?
So just a quick question. If I enable IPV6 on my router should I automatically get an Dynamic IP or must it be requested?
@AfriNatic any idea when Vumatel trenched customers will be able to use IPv6?
For DHCP connection it should work on both but change it to DHCPv6 to be sure.
nemisiz said:
@AfriNatic any idea when Vumatel trenched customers will be able to use IPv6?
When hell freezes over.
ISPs need to start demanding that Vuma change the AE network to layer 2 like the GPON, then ISPs can do anything they wish without needing to be beholden to Vuma.
@AfriNatic any idea when Vumatel trenched customers will be able to use IPv6?
When hell freezes over.
ISPs need to start demanding that Vuma change the AE network to layer 2 like the GPON, then ISPs can do anything they wish without needing to be beholden to Vuma.
Can someone on IPv6 please let me know if you can access the following,
https://ipv6-test.com/ - doesn't load at all, but loads fine when I am on IPv4 only. Note this is NOT the site that does the 10 tests, that one is test-ipv6.com (words reversed). There I do get the 10/10.
https://community.ui.com/ - blank screen and then after a while the following shows,
Error: Network error: Failed to fetch
Try again
Also works fine when on IPv4 only.
Only two examples I have found so far, would just like to know the reasons behind it.
https://ipv6-test.com/ - doesn't load at all, but loads fine when I am on IPv4 only. Note this is NOT the site that does the 10 tests, that one is test-ipv6.com (words reversed). There I do get the 10/10.
https://community.ui.com/ - blank screen and then after a while the following shows,
Error: Network error: Failed to fetch
Try again
Also works fine when on IPv4 only.
Only two examples I have found so far, would just like to know the reasons behind it.
AxField
Expert Member
- Joined
- Apr 30, 2009
- Messages
- 1,647
- Reaction score
- 1,749
Both work for me. I only figured out how to get ipv6 working yesterday on a UDM pro. Now I need to reconfigure my AdGuard to work properly again
SauRoNZA
Honorary Master
Aaah yes I’ve completely forgotten I need to go fiddle with AdGuard still.
The IPv6 for prefix delegation is still being worked on by VX Fibre to make this available in the apps that control Vuma's Active Ethernet network.
As soon as it's available we will be one of the first to offer it. We have the subnets configure and ready to go.
So what fixed it for me is I had to change my IPv6 MSS clamping value. (Firewall settings).
IPv4 = 1452 (1492 layer 2 MTU - 20 byte IPv4 header - 20 byte TCP header) = maximum size of a TCP segment payload.
IPv6 = 1432 (1492 layer 2 MTU - 40 byte IPv6 header - 20 byte TCP header) = maximum size of a TCP segment payload.
IPv4 = 1452 (1492 layer 2 MTU - 20 byte IPv4 header - 20 byte TCP header) = maximum size of a TCP segment payload.
IPv6 = 1432 (1492 layer 2 MTU - 40 byte IPv6 header - 20 byte TCP header) = maximum size of a TCP segment payload.
Last edited:
Neo_X
Expert Member
Can anybod maybe hazard a guess as to why test-ipv6.com presents this?
