The AirTies thread

[Dolby]

https://freshtech.co.za/collections...0-access-point-single-mesh-extension-unit[/B]

Look at the URL

He's taken 3 singles and sells them as a triple - nothing wrong with that, but they'll be 3 separate boxes and not pre-paired from the factory. You'll need to udr the WPS button on each.

I mean there's no single box with three, pre-paired units

 

[SoTrue]

I've got some firmware files - will send you a PM with the link

I would please also like the link to the firmware files. It seems my 3 4920's have firmware version 1.33.10.8.825 - do I need another version to work with a new 4930?

 

[SoTrue]

I've got some firmware files - will send you a PM with the link

Thanks for the PM powermzii, I used the files to update the firmware of my 4920's.

 

[powermzii]

Thanks for the PM powermzii, I used the files to update the firmware of my 4920's.

All working ok?

 

[SoTrue]

All working ok?

Yes, thanks for asking! I still need to move the nodes around to optimise reception throughout the house.

 

[Nethers]

YGPM

Hi, could you please share the firmware versions with me. I’ve searched all over online and can’t find them.
Thanks

 

[powermzii]

Hi, could you please share the firmware versions with me. I’ve searched all over online and can’t find them.
Thanks

Ygpm

 

[powermzii]

Hi, could you please share the firmware versions with me. I’ve searched all over online and can’t find them.
Thanks

Did you come right?

 

[capetowngsh]

I have a 6 unit system I am looking to sell, plus 2 singles - all on the latest firmware. DM me if interested. Very fair pricing

 

[powermzii]

I have a 6 unit system I am looking to sell, plus 2 singles - all on the latest firmware. DM me if interested. Very fair pricing

Ygpm

 

[Shalin_ZN]

I have a 6 unit system I am looking to sell, plus 2 singles - all on the latest firmware. DM me if interested. Very fair pricing

PM'd you as well, if you have any left, I'd be interested.

 

[Saba'a]

Have a triple set I havent even used. Bought it from Reeve technology. Available if reasonable offer made. Feel free to PM.

Will advertise as part of my clearance. Just need to go through everything and list all the stuff.

Using current triple set from Vox. Decided to use network cable as backhaul between airties.

Update:

Sold and tested.

Might sell my current triple pack in March that I'm using but doubt it.

 

[HeiGei]

All working ok?

Hi there
Any feedback on whether or not this worked? I'm returning my 4930 (single) for the second time (to Takealot), as trying to order a 4920 single seems impossible. I have firmware 1.33.10.8.825 on my 4920's and just cannot get the new 4930 to mesh with the 3-pack 4920's. Any help would be greatly appreciated!

 

[Saba'a]

Hi there
Any feedback on whether or not this worked? I'm returning my 4930 (single) for the second time (to Takealot), as trying to order a 4920 single seems impossible. I have firmware 1.33.10.8.825 on my 4920's and just cannot get the new 4930 to mesh with the 3-pack 4920's. Any help would be greatly appreciated!

Contact Nology for help. If you in Gauteng you could pop in as Nology is in Centurion. Ask for Robin.

 

[powermzii]

Hi there
Any feedback on whether or not this worked? I'm returning my 4930 (single) for the second time (to Takealot), as trying to order a 4920 single seems impossible. I have firmware 1.33.10.8.825 on my 4920's and just cannot get the new 4930 to mesh with the 3-pack 4920's. Any help would be greatly appreciated!

Have you tried to update the 4920s? An easy way to get am additional noce to join your mesh is to plug it into another node thats already setup via ethernet then switch on the new node. The new node will inherit the mesh settings from the old one

So in your case, first update the 4920s to the latest firmware then when that is done, plug the 4930 into one of the 4920s ethernet. Switchh on the 4930 and after 3-4 minutes it'll show up in the app

 

[HeiGei]

Contact Nology for help. If you in Gauteng you could pop in as Nology is in Centurion. Ask for Robin.

Thanks, I've emailed the Cape Town branch and will wait for their reply.

 

[HeiGei]

Have you tried to update the 4920s? An easy way to get am additional noce to join your mesh is to plug it into another node thats already setup via ethernet then switch on the new node. The new node will inherit the mesh settings from the old one

So in your case, first update the 4920s to the latest firmware then when that is done, plug the 4930 into one of the 4920s ethernet. Switchh on the 4930 and after 3-4 minutes it'll show up in the app

Hi there, yes, we tried that twice as well, and still didn't work. After multiple tries the assumption was that they aren't compatible. I'm trying to source a single 4920, and will try that. I've also emailed Vox to see what they say - no reply yet. Thanks so much

 

[Saba'a]

Thanks, I've emailed the Cape Town branch and will wait for their reply.

Try to have them to let you speak with Robin.

 

[powermzii]

Is there a way to measure the 'noise' on an airties Wifi network? Or to see how congested the wifi bands are? Is this where the CCA Monitor would come in?



Raising this as recently i've added quite a number of smart home devices all on the 2.4Ghz network and i get the sense (with no actual measurement) that the APs are struggling with the loads - i have about 30-36 devices connecting to wifi

3 of my nodes are hardwired and the others are on Wifi MESH and ive noticed that after sometime more and more of my smarthome devices stop responding / drop off from the network - is there anyway of checking and possibly resolving this? Aside from getting a different brand of AP of course (that's a 2021 project)

 

[powermzii]

Is there a way to measure the 'noise' on an airties Wifi network? Or to see how congested the wifi bands are? Is this where the CCA Monitor would come in?

View attachment 1029854

Raising this as recently i've added quite a number of smart home devices all on the 2.4Ghz network and i get the sense (with no actual measurement) that the APs are struggling with the loads - i have about 30-36 devices connecting to wifi

3 of my nodes are hardwired and the others are on Wifi MESH and ive noticed that after sometime more and more of my smarthome devices stop responding / drop off from the network - is there anyway of checking and possibly resolving this? Aside from getting a different brand of AP of course (that's a 2021 project)

Anyone?