Web Squad ISP

Status
Not open for further replies.
ONT direct:

Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 223 MBytes 187 Mbits/sec 0.281 ms 3694/163438 (2.3
%)
[ 4] Sent 163438 datagrams
[SUM] 0.0-10.0 sec 1186 datagrams received out-of-order
CPU Utilization: local/receiver 33.9% (9.3%u/24.6%s), remote/sender 5.4% (6.8%u/
0.0%s)

iperf Done.
 
Loadshedding started at 6 so nearly 3% loss even when the lights are out.

I think I need to get my line properly monitored.

Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 223 MBytes 187 Mbits/sec 0.066 ms 4497/163444 (2.8
%)
[ 4] Sent 163444 datagrams
[SUM] 0.0-10.0 sec 1171 datagrams received out-of-order
CPU Utilization: local/receiver 32.5% (8.9%u/23.5%s), remote/sender 3.7% (0.5%u/
3.2%s)

iperf Done.
 
Can someone advise.
Upgraded to the Gbps package, trying to get my speeds.
cat 6 from ont to Huawei B315 cat 6 to pc.
Pc registers 1Gbps network.
Speedtests only hit 100Mbps, tested all cables. They are all fine.
What am i missing.
Huawei has Gbps ports so im stumped?
 
Concentric said:
Can someone advise.
Upgraded to the Gbps package, trying to get my speeds.
cat 6 from ont to Huawei B315 cat 6 to pc.
Pc registers 1Gbps network.
Speedtests only hit 100Mbps, tested all cables. They are all fine.
What am i missing.
Huawei has Gbps ports so im stumped?
Click to expand...
pretty sure the B315 is only a 100Mbit ports, try directly to the ONT/CPE
 
Yeah, wanted to say that the B315 doesn't have gigabit ethernet ports (or at least the 936 model that I have) like Waylander already pointed out.

Googling it, I found that it says "Ethernet connections are no longer bottlenecks. The B315 delivers maximum speeds of LTE CAT4 150 Mbps through its Gigabit Ethernet port." (https://consumer.huawei.com/za/smart-home/b315/).

Although, it doesn't really say if the WAN port or which port for that matter is a gigabit capable, maybe its a typo on their site.

You'll need to get a router with gigabit ethernet ports or you won't see anything higher than 100mbps. I bought a Tp-Link Archer C2 for about R800 last year as it was one of the cheapest gigabit ethernet port routers I could find.
 
StoneCold said:
Yeah, wanted to say that the B315 doesn't have gigabit ethernet ports (or at least the 936 model that I have) like Waylander already pointed out.

Googling it, I found that it says "Ethernet connections are no longer bottlenecks. The B315 delivers maximum speeds of LTE CAT4 150 Mbps through its Gigabit Ethernet port." (https://consumer.huawei.com/za/smart-home/b315/).

Although, it doesn't really say if the WAN port or which port for that matter is a gigabit capable, maybe its a typo on their site.

You'll need to get a router with gigabit ethernet ports or you won't see anything higher than 100mbps. I bought a Tp-Link Archer C2 for about R800 last year as it was one of the cheapest gigabit ethernet port routers I could find.
Click to expand...
Waylander said:
Don't know.
Click to expand...
So i think i figured it out.
I tried to create the connection from my PC directly onto the ont.
The link on GE1 on the Zohne device to my pc is only 100Mbps, when i switch to GE2 the line-speed increases to 1Gbps.
The Pppoe connection wont work through GE2 though.
@websquadza any ideas?
 
C:\Users\Lindsay>C:\Users\Lindsay\Downloads\Compressed\iperf-3.1.3-win64\iperf-3
.1.3-win64\iperf3.exe -V -u -p 17001 -R -c queen.cisp.co.za -O 2 -l 1400 -b 50M
iperf 3.1.3
CYGWIN_NT-6.1 Lindsay-PC 2.5.1(0.297/5/3) 2016-04-21 22:14 x86_64
Time: Sun, 24 Mar 2019 07:13:04 GMT
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
Cookie: Lindsay-PC.1553411584.427634.63e265e
[ 4] local 192.168.1.102 port 51521 connected to 62.233.65.195 port 17001
Starting Test: protocol: UDP, 1 streams, 1400 byte blocks, omitting 2 seconds, 1
0 second test
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-1.01 sec 6.18 MBytes 51.6 Mbits/sec 1.186 ms 763/5394 (14%)
(omitted)
[ 4] 1.00-1.01 sec 6.05 MBytes 25.2 Mbits/sec 0.207 ms 0/8987 (0%)
[ 4] 1.01-2.00 sec 5.88 MBytes 50.0 Mbits/sec 0.207 ms 0/4406 (0%)
[ 4] 2.00-3.00 sec 5.96 MBytes 50.0 Mbits/sec 0.216 ms 0/4464 (0%)
[ 4] 3.00-4.00 sec 5.97 MBytes 50.0 Mbits/sec 0.254 ms 0/4470 (0%)
[ 4] 4.00-5.02 sec 6.04 MBytes 50.0 Mbits/sec 0.215 ms 0/4521 (0%)
[ 4] 5.02-6.01 sec 5.95 MBytes 50.0 Mbits/sec 0.214 ms 0/4460 (0%)
[ 4] 6.01-7.01 sec 5.97 MBytes 50.0 Mbits/sec 1.193 ms 0/4468 (0%)
[ 4] 7.01-8.01 sec 5.95 MBytes 50.0 Mbits/sec 0.261 ms 0/4457 (0%)
[ 4] 8.01-9.00 sec 5.88 MBytes 50.0 Mbits/sec 0.216 ms 0/4405 (0%)
[ 4] 9.00-10.00 sec 5.95 MBytes 50.0 Mbits/sec 0.208 ms 0/4456 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 61.8 MBytes 51.9 Mbits/sec 0.226 ms 0/45389 (0%)
[ 4] Sent 45389 datagrams
CPU Utilization: local/receiver 27.3% (8.2%u/19.1%s), remote/sender 6.0% (0.8%u/
5.2%s)

iperf Done.
 
iperf3: OUT OF ORDER - incoming packet = 37803 and received packet = 37816 AND S
P = 4
iperf3: OUT OF ORDER - incoming packet = 37804 and received packet = 37816 AND S
P = 4
iperf3: OUT OF ORDER - incoming packet = 37805 and received packet = 37816 AND S
P = 4
iperf3: OUT OF ORDER - incoming packet = 37806 and received packet = 37816 AND S
P = 4
iperf3: OUT OF ORDER - incoming packet = 37807 and received packet = 37816 AND S
P = 4
iperf3: OUT OF ORDER - incoming packet = 37808 and received packet = 37816 AND S
P = 4
[ 4] 3.00-4.00 sec 9.50 MBytes 79.7 Mbits/sec 0.022 ms 71/7143 (0.99%)

[ 4] 4.00-5.00 sec 9.54 MBytes 80.0 Mbits/sec 0.034 ms 0/7143 (0%)
[ 4] 5.00-6.00 sec 9.54 MBytes 80.0 Mbits/sec 0.022 ms 0/7143 (0%)
[ 4] 6.00-7.00 sec 9.54 MBytes 80.0 Mbits/sec 0.155 ms 0/7143 (0%)
[ 4] 7.00-8.00 sec 9.54 MBytes 80.0 Mbits/sec 0.022 ms 0/7143 (0%)
[ 4] 8.00-9.00 sec 9.54 MBytes 80.0 Mbits/sec 0.023 ms 0/7143 (0%)
[ 4] 9.00-10.00 sec 9.54 MBytes 80.0 Mbits/sec 0.021 ms 0/7143 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 98.9 MBytes 82.9 Mbits/sec 0.080 ms 99/72642 (0.14%)

[ 4] Sent 72642 datagrams
[SUM] 0.0-10.0 sec 41 datagrams received out-of-order
CPU Utilization: local/receiver 19.6% (5.7%u/13.9%s), remote/sender 2.6% (0.3%u/
2.3%s)

iperf Done.
 
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 223 MBytes 187 Mbits/sec 0.092 ms 2685/163438 (1.6
%)
[ 4] Sent 163438 datagrams
[SUM] 0.0-10.0 sec 615 datagrams received out-of-order
CPU Utilization: local/receiver 29.2% (9.8%u/19.4%s), remote/sender 3.1% (0.4%u/
2.7%s)

iperf Done.
 
I'll give it a month, then downgrade to 50mb/s, seeing that is the speed I kinda get.
 
Status
Not open for further replies.
Back
Top
Sign up to the MyBroadband newsletter
X