Web Squad ISP

Status
Not open for further replies.
Also seeing odd behavior,slowness,DNS issues,i'm trying to isolate now
 
Like even Tailscale is having a fit
May 11 18:55:43 Nanosrv tailscaled[403]: logtail: upload: log upload of 4148 bytes compressed failed: Post "https://log.tailscale.io/c/tailnode.log.tailscale.io/xxxxxxxxxxxxxxxxxxx": context deadline exceeded
May 11 18:55:43 Nanosrv tailscaled[403]: logtail: [v1] backoff: 2103 msec
May 11 18:56:24 Nanosrv tailscaled[403]: Received error: PollNetMap: Post "https://controlplane.tailscale.com/machine/map": read tcp 192.168.0.64:37360->18.156.90.224:80: read: connection reset by peer
 
Primary was google,swapped to cloudflare

Stuff over VPN seems to run dandy,just my local linuxes that are having fits
 
PsyWulf said:
Reachable
What's your DNS?
Click to expand...
nelis said:
I tried cloudflare, google same issue
Click to expand...
I’ve managed to reach someone at Openserve - there is an MTU issue on the switch we’re connected to, they are aware of this. There is a planned change control for the early am (00:00-06:00) which will resolve this. Thanks for your patience here
 
websquadza said:
I’ve managed to reach someone at Openserve - there is an MTU issue on the switch we’re connected to, they are aware of this. There is a planned change control for the early am (00:00-06:00) which will resolve this. Thanks for your patience here
Click to expand...
Whew so glad i'm not losing my mind

Top service as always!
 
websquadza said:
I’ve managed to reach someone at Openserve - there is an MTU issue on the switch we’re connected to, they are aware of this. There is a planned change control for the early am (00:00-06:00) which will resolve this. Thanks for your patience here
Click to expand...
Can this be related to my issue as well
 
Still seems hella unstable,do I need to reboot anything?
 
@PsyWulf
What is the MTU that you getting. I have an automatic MTU algo that runs once an hour on the SD-WAN so don't notice that there were issues unless I look at the NPM.
But on a mikrotik a change in MTU isn't automatically detected. So reboot.
Also check fragmentation and see if the CPU is being stressed.
There is a certain ISP that is blasting fragmented packets left right and centre.
 
r00igev@@r said:
@PsyWulf
What is the MTU that you getting. I have an automatic MTU algo that runs once an hour on the SD-WAN so don't notice that there were issues unless I look at the NPM.
But on a mikrotik a change in MTU isn't automatically detected. So reboot.
Also check fragmentation and see if the CPU is being stressed.
There is a certain ISP that is blasting fragmented packets left right and centre.
Click to expand...
MTU/MRU 1480
 
You did set me on a quick test path,ping with 1462 seems stable,above that goes derp
r00igev@@r said:
@PsyWulf
What is the MTU that you getting. I have an automatic MTU algo that runs once an hour on the SD-WAN so don't notice that there were issues unless I look at the NPM.
But on a mikrotik a change in MTU isn't automatically detected. So reboot.
Also check fragmentation and see if the CPU is being stressed.
There is a certain ISP that is blasting fragmented packets left right and centre.
Click to expand...
 
Status
Not open for further replies.
Back
Top
Sign up to the MyBroadband newsletter
X