Which (re)installation of Windows keeps your programs installed and working?

Belgarath

Well-Known Member
Joined
Oct 13, 2009
Messages
245
Reaction score
0
Which (re)installation of Windows keeps your programs installed and working?

A plain reinstallation without formatting or the running of the windows setup from within windows?
 
Which (re)installation of Windows keeps your programs installed and working?

A plain reinstallation without formatting or the running of the windows setup from within windows?

You must boot the pc with your Windows 7 disc inserted, then choose repair.
 
I've got XP.

XP doesn't boot up further than the safe mode/last known good config/boot normally screen.
In safe mode it doesn't go further than Mup.sys
Say there's nothing wrong with the hardware and it's just a system file(s) that has gone fubar ... what would you do to first find out which system files are faulty and second, how would you fix it without having to format and lose your programs and data?
 
I've got XP.

XP doesn't boot up further than the safe mode/last known good config/boot normally screen.
In safe mode it doesn't go further than Mup.sys
Say there's nothing wrong with the hardware and it's just a system file(s) that has gone fubar ... what would you do to first find out which system files are faulty and second, how would you fix it without having to format and lose your programs and data?

Have you considered attaching your HDD to another PC & retrieving your data? Can't save programs but all your info & emails can be saved.
 
Have you considered attaching your HDD to another PC & retrieving your data? Can't save programs but all your info & emails can be saved.

The PC is our bookkeeper's. It has Pastel on it. And we'll have to get someone to instal setup the whole thing again. This is not my area.
 
Last edited:
The PC is our bookkeeper's. It has Pastel on it. And we'll have to get someone to instal setup the whole thing again. This is not my area.
I'm sitting with a family friend's notebook with the same (Pastel) dilemma. But in my case the HDD has plenty of bad sectors and the partition(s) have been corrupted.
 
The PC is our bookkeeper's. It has Pastel on it. And we'll have to get someone to instal setup the whole thing again. This is not my area.

if the disks are there & a back-up has been taken you install as you would any other program, call pastel get them to active & place the files in the correct folder & away you go :)

no special settings.
 
I'm sitting with a family friend's notebook with the same (Pastel) dilemma. But in my case the HDD has plenty of bad sectors and the partition(s) have been corrupted.

has anyone tried doing data recovery on the HDD?
 
Me. Still running after 34 hours..

that means the HDD has bad damage but it does not mean that the data can't be recovered. The longest I've waited for 30GB of data was 5 days, but then I have a PC that is used for that purpose or virus scans on really badly infected HDDs.
 
System file repair ... outside windows ... how would you do it?

Please, formatting and installing backuped data is not an option.
 
that means the HDD has bad damage but it does not mean that the data can't be recovered. The longest I've waited for 30GB of data was 5 days, but then I have a PC that is used for that purpose or virus scans on really badly infected HDDs.
This is a 250Gb hdd... I've done some of them already - it takes loooooong (and hopefully no power failures!).
 
System file repair ... outside windows ... how would you do it?

Please, formatting and installing backuped data is not an option.
You seem to have a corrupt driver or system file that is causing your boot up to hang.
Insert Windows disk and repair?
 
I've got XP.

XP doesn't boot up further than the safe mode/last known good config/boot normally screen.
In safe mode it doesn't go further than Mup.sys
Say there's nothing wrong with the hardware and it's just a system file(s) that has gone fubar ... what would you do to first find out which system files are faulty and second, how would you fix it without having to format and lose your programs and data?

I have had a Mup.sys error or two in the past. In one case, it was USB device drivers being corrupted... removed ALL USB devices... booted into Windows then and began a registry clean-out. The other time is was a 130W power supply not being able to supply juice to new graphics card and new hard drives in an older desktop machine. Popped in a 250W PSU, no more MUP.sys error.....
 
System file repair ... outside windows ... how would you do it?

Please, formatting and installing backuped data is not an option.

You'd have to repair windows & then try recover/repair the programs if they have also gone belly up.

Does the HDD make any funky sounds as the PC starts up? would be best to listen for that when the PC starts up from cold.
 
I have had a Mup.sys error or two in the past. In one case, it was USB device drivers being corrupted... removed ALL USB devices... booted into Windows then and began a registry clean-out. The other time is was a 130W power supply not being able to supply juice to new graphics card and new hard drives in an older desktop machine. Popped in a 250W PSU, no more MUP.sys error.....

IE start PC using PS2 devices(mouse & keyboard). Also look at the condition of the USB ports. I have seen a few that have been badly damaged due to people not taking care of how they insert/remove USB devices. If you know the right people most USB ports are repairable if they have been damaged.
 
Well only a repair will keep you programs installed and working! Or you could try an upgrade to Win 7 if you using XP.

You could also reinstall windows, I allow it to delete my Windows folder and as along as you don't format the Hard drive then you'll have all your Data but you'll have to reinstall your programs again.
 
Why are you guys trying an exercise in futility?

Just copy the Pastel companies to a flash drive, grab a new hard drive, install XP again, install Pastel (phone Pastel and get new code from them) and copy the companies back. It's easy.

My biggest challenge was to copy a lot of companies back to a new Evolution database, but it worked just fine. Hectic. :p
 
Top
Sign up to the MyBroadband newsletter
X