Hi I am trying to run a custom script which is posted on Gatecrashers thread to create multiple pppoe connections. however when I run the command I get
this error
using channel 26
pppoe: ioctl(SIOCGIFHWADDR): Session 0: No such device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
pppoe: ioctl(SIOCGIFHWADDR): Session 0: No such device
Script /usr/sbin/pppoe -U -I vlan1 finished (pid 2549), status = 0x1
Modem hangup
Connection terminated.
the command I am trying to execute is the following
"pppd pty 'pppoe -U -I vlan1' noipdefault noauth nodefaultroute noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp nomppe nomppc usepeerdns user $2 password $3 default-asyncmap mtu 1492 mru 1492 persist lcp-echo-interval 5 lcp-echo-failure 10 maxfail 0 holdoff 30 unit 0"
anyone have any ideas? I am using Openwrt KAMAKAZI 7.09
Gatecrasher is using DD-WRT and on that firmware it seems to work with no problems
this error
using channel 26
pppoe: ioctl(SIOCGIFHWADDR): Session 0: No such device
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
pppoe: ioctl(SIOCGIFHWADDR): Session 0: No such device
Script /usr/sbin/pppoe -U -I vlan1 finished (pid 2549), status = 0x1
Modem hangup
Connection terminated.
the command I am trying to execute is the following
"pppd pty 'pppoe -U -I vlan1' noipdefault noauth nodefaultroute noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp nomppe nomppc usepeerdns user $2 password $3 default-asyncmap mtu 1492 mru 1492 persist lcp-echo-interval 5 lcp-echo-failure 10 maxfail 0 holdoff 30 unit 0"
anyone have any ideas? I am using Openwrt KAMAKAZI 7.09
Gatecrasher is using DD-WRT and on that firmware it seems to work with no problems