Smart light switches

Kosmik said:
You sure about those broadlinks not requiring a cap?

View attachment 1095887

*edit* I see it really doesn't but the cost is quite high from Amazon and I see ubay has it but a 2 gang is R600. For multiple switches, cheaper to have a sparky draw wire to all points once off I think.
Click to expand...
Yep see below diagram.
3c26db2fa9416bb2bab86ef585ae8966.jpg
 
Last edited:
Saba'a said:
Adaptor plate for smart light switches, US to ZA, Black




www.isphome.co.za

Adaptor plate for smart light switches, US to ZA, Black

These adapter plates assist with the installation of Smart light switches (which are usually offered in US dimensions that are marginally smaller than standard SA dimensions. The US to ZA Adaptor Plate is laser cut from 3mm Perspex and guide holes are cut according to standard smart switches to...
www.isphome.co.za www.isphome.co.za
b2232cd6424a71edee0b19eb2f678bdf.jpg
Click to expand...

A picture of them installed would be appreciated if you've bough from the seller?
 
My switches all fine so no real need. But see descriptions below:

"Standard dimension" is identical in size to the normal traditional SA light switch cover plates.

"Oversize dimension" is approximately 5mm wider on all 4 sides than the standard dimension to assist with covering of any imperfections of the wall.
 
Pho3nix said:
A picture of them installed would be appreciated if you've bough from the seller?
Click to expand...
I bought them for my place from that company. He is really helpful as well. This helped because I could see small chips on the wall when coming close to the light switch before installing this. This wasn't a problem when the normal RSA light switch was installed cause it was covered by the plate.
 
Sirus_the_virus said:
I bought them for my place from that company. He is really helpful as well. This helped because I could see small chips on the wall when coming close to the light switch before installing this. This wasn't a problem when the normal RSA light switch was installed cause it was covered by the plate.
Click to expand...

Picture please?
 
Pho3nix said:
Picture please?
Click to expand...
www.isphome.co.za

Adaptor plate for smart light switches, US to ZA

These adapter plates assist with the installation of Smart light switches (which may be offered in US or EU dimensions instead of the standard 2" x 4" dimensions as used in South Africa). This Adaptor Plate is laser cut from 3mm Perspex and guide holes are cut according to standard smart...
www.isphome.co.za www.isphome.co.za

I can post pics tomorrow. But thats how it looks though. Unless you pm me and can send it via whatsapp now?
 
Kosmik said:
You sure about those broadlinks not requiring a cap?

View attachment 1095887

*edit* I see it really doesn't but the cost is quite high from Amazon and I see ubay has it but a 2 gang is R600. For multiple switches, cheaper to have a sparky draw wire to all points once off I think.
Click to expand...
Any idea on ballpark costs to have a sparky come draw N wires?
 
Erohann said:
Any idea on ballpark costs to have a sparky come draw N wires?
Click to expand...
Depends on number of points. They charge per point so normally best to do it as an extra while doing other work.

But you can negotiate.

Have you verified no neutrals, as newer houses may have it. Also is there space in your conduits for neutrals?
 
Erohann said:
Any idea on ballpark costs to have a sparky come draw N wires?
Click to expand...
Yeah unfortunately it's very much a length of string question. Main cost is labor, depends on the number of light points ( I have 8) and depends on how they wired the house too. Founf some very dodgy wiring practices while upgrading my switches.

I'm leaving that until the time i install s inverter and battery system, want the house rewired then with seperate dbs and high/low circuits.
 
Saba'a said:
Depends on number of points. They charge per point so normally best to do it as an extra while doing other work.

But you can negotiate.

Have you verified no neutrals, as newer houses may have it. Also is there space in your conduits for neutrals?
Click to expand...
I checked one light switch, no neutral. No idea on conduit space. Place is 25+years old I think. Moving in month end.
 
If moving in, consider redoing wiring beforehand.

Also consider modernising ito DB and CB for future solar power.
 
Saba'a said:
If moving in, consider redoing wiring beforehand.

Also consider modernising ito DB and CB for future solar power.
Click to expand...
Its a timing problem of only getting keys a day or two hopefully before move day
 
Can anyone recommend an electrician in the Randburg area to come look and draw neutral wires?
 
Hi guys

What would be the best option to make a 3 switch light switch smart. My preference would be to keep the existing switch and so initially was looking at the Sonoff Mini R2 but it seems you can only get connect a single switch to the Mini R2. I need to make a 2 switch light switch smart as well.
 
ZeroNeo said:
Hi guys

What would be the best option to make a 3 switch light switch smart. My preference would be to keep the existing switch and so initially was looking at the Sonoff Mini R2 but it seems you can only get connect a single switch to the Mini R2. I need to make a 2 switch light switch smart as well.
Click to expand...
Just buy some switches.

You get 3 gang and 2 gang ones. Sonoff or Tuya. Neutral or no neutral etc.

Check out eiferer or others below.
 
Saba'a said:

List of home automation products sellers

Thought a list of sellers of LOCAL smart kit might be useful.
r.tapatalk.com r.tapatalk.com

List of home automation products sellers
Click to expand...
Thanks, the reason I want to keep the standard switches is because the soft touch switch is going to irritate me having to look for he button and not be able to do it by feel to switch a light on by feel.
 
ZeroNeo said:
Thanks, the reason I want to keep the standard switches is because the soft touch switch is going to irritate me having to look for he button and not be able to do it by feel to switch a light on by feel.
Click to expand...
Hmm, yes the click switch ones bigger. I use a TreatLife 3 way one for my passage and enjoy the traditional click.

But for others I use Google Home voice control and Google Home app on phone. Have google mini speakers, hub and the older Home Hub speakers around the house.

But can use your phone as well for voice control.



Smart Light Switch, Yeewell WiFi Light Switch with Timer and Remote Control, Compatible with Alexa, Google home and IFTTT, No Hub Required, 2 gang - - Amazon.com

Smart Light Switch, Yeewell WiFi Light Switch with Timer and Remote Control, Compatible with Alexa, Google home and IFTTT, No Hub Required, 2 gang - - Amazon.com
www.amazon.com


MoesGo WiFi Wall Push Button Smart Light Switch Smart Life/Tuya App Wireless Remote Control Single Pole or Multi-Control Association Voice Control with Alexa, Google Home White 4 Gang: Amazon.com: Industrial & Scientific

MoesGo WiFi Wall Push Button Smart Light Switch Smart Life/Tuya App Wireless Remote Control Single Pole or Multi-Control Association Voice Control with Alexa, Google Home White 4 Gang: Amazon.com: Industrial & Scientific
www.amazon.com

Kasa Smart Light Switch HS200P3, Single Pole, Needs Neutral Wire, 2.4GHz Wi-Fi Light Switch Works with Alexa and Google Home, UL Certified, No Hub Required, 3-Pack, White - - Amazon.com

Kasa Smart Light Switch HS200P3, Single Pole, Needs Neutral Wire, 2.4GHz Wi-Fi Light Switch Works with Alexa and Google Home, UL Certified, No Hub Required, 3-Pack, White - - Amazon.com
www.amazon.com
 
ZeroNeo said:
Thanks, the reason I want to keep the standard switches is because the soft touch switch is going to irritate me having to look for he button and not be able to do it by feel to switch a light on by feel.
Click to expand...
@Dolby any Shelly solutions that can be used?
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X