The Asic thread

Thank you all for the replies. Really do appreciate it. Will head over to the office later to gain access to the D3 and will post logs.

Do s anyone know if it is possible to get access to the miner without actually being on the local network? Leaving a pc on overnight for teamviewer etc is costing extra electricity..
 
Sabre Wulf said:
Funny enough it doesn't have the optional check box to shut it down at 80% (Miner settings tab). That said, perhaps that's the default anyway - except that mine reports 80 degrees on one of the chip temperatures on a normal day.

I just checked mine and discovered on the miner status page that one of the hashboards was down. Hopefully not permanent - i just moved stuff around yesterday and had to unplug / reseat stuff so I'll pop in and see what's up and report back.

*EDIT* a reboot sorted it. Not sure why it was down to start with though.
@oliverwww if you send me your kernel log (system - kernel log tab) we may see something there. Also post a screenshot of your miner status page when it's glitching.

Here's my status page

yzvHi3w.png
Click to expand...

So far not glitching, will post one when I can.

Can you PM me your email or something? The kernel log is too long for PM
 
What could be causing the temperature to not be read?

Jan 1 00:05:49 (none) local0.notice cgminer[27934]: set_temperature_offset_value: Chain0 Sensor0 temp offset : -2,
Jan 1 00:05:50 (none) local0.notice cgminer[27934]: set_temperature_offset_value: Chain1 Sensor0 temp offset : -2,
Jan 1 00:05:50 (none) local0.notice cgminer[27934]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -3,
Jan 1 00:05:50 (none) local0.notice cgminer[27934]: frequency = '537'
Jan 1 00:05:50 (none) local0.notice cgminer[27934]: dev.timeout = 562356 us
Jan 1 00:05:50 (none) local0.notice cgminer[27934]: open_core
Jan 1 00:05:59 (none) local0.err cgminer[27934]: cgminer time error total_secs = 946685159.691632 last_total_secs = 1.000000
Jan 1 00:06:09 (none) local0.warn cgminer[27934]: Waiting for work to be available from pools.
Jan 1 00:06:13 (none) local0.warn cgminer[27934]: Failed to resolve (?wrong URL) eu.multipool.us:3375
Jan 1 00:06:19 (none) local0.warn cgminer[27934]: Failed to resolve (?wrong URL) eu.multipool.us:3371
Jan 1 00:06:22 (none) local0.warn cgminer[27934]: Work available from pools, resuming.
Jan 1 00:06:27 (none) local0.warn cgminer[27934]: API running in IP access mode on port 4028 (17)
Jan 1 00:10:50 (none) local0.warn cgminer[27934]: Lost 15 shares due to stratum disconnect on pool 0
Jan 1 00:10:56 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:00 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:01 (none) local0.warn cgminer[27934]: Waiting for work to be available from pools.
Jan 1 00:11:04 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:08 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:10 (none) local0.warn cgminer[27934]: Pool 0 stratum+tcp://eu.multipool.us:3375 not responding!
Jan 1 00:11:10 (none) local0.warn cgminer[27934]: Switching to pool 1 stratum+tcp://eu.multipool.us:11111
Jan 1 00:11:13 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:17 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:21 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:25 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:29 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:30 (none) local0.warn cgminer[27934]: Pool 1 stratum+tcp://eu.multipool.us:11111 not responding!
Jan 1 00:11:33 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:37 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:42 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:46 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:50 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:54 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:11:58 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:02 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:07 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:11 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:15 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:19 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:23 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:27 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:31 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:36 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:40 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:44 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:48 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:52 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 121 seconds, so don't send work to hashboard anymore
Jan 1 00:12:52 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:53 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 122 seconds, so don't send work to hashboard anymore
Jan 1 00:12:54 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 123 seconds, so don't send work to hashboard anymore
Jan 1 00:12:55 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 124 seconds, so don't send work to hashboard anymore
Jan 1 00:12:56 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 125 seconds, so don't send work to hashboard anymore
Jan 1 00:12:56 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:12:57 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 126 seconds, so don't send work to hashboard anymore
Jan 1 00:12:58 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 127 seconds, so don't send work to hashboard anymore
Jan 1 00:12:59 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 128 seconds, so don't send work to hashboard anymore
Jan 1 00:13:00 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 129 seconds, so don't send work to hashboard anymore
Jan 1 00:13:00 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:13:01 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 130 seconds, so don't send work to hashboard anymore
Jan 1 00:13:02 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 131 seconds, so don't send work to hashboard anymore
Jan 1 00:13:03 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 133 seconds, so don't send work to hashboard anymore
Jan 1 00:13:04 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 134 seconds, so don't send work to hashboard anymore
Jan 1 00:13:05 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:13:05 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 135 seconds, so don't send work to hashboard anymore
Jan 1 00:13:06 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 136 seconds, so don't send work to hashboard anymore
Jan 1 00:13:07 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 137 seconds, so don't send work to hashboard anymore
Jan 1 00:13:08 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 138 seconds, so don't send work to hashboard anymore
Jan 1 00:13:09 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:13:09 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 139 seconds, so don't send work to hashboard anymore
Jan 1 00:13:10 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 140 seconds, so don't send work to hashboard anymore
Jan 1 00:13:11 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 141 seconds, so don't send work to hashboard anymore
Jan 1 00:13:12 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 142 seconds, so don't send work to hashboard anymore
Jan 1 00:13:13 (none) local0.err cgminer[27934]: read_temp_func: can't read all sensor's temperature, close PIC and need reboot!!!
Jan 1 00:13:14 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 143 seconds, so don't send work to hashboard anymore
Jan 1 00:13:15 (none) local0.err cgminer[27934]: check_miner_status: We have lost internet for 144 seconds, so don't send work to hashboard anymore
....
 
oliverwww said:
What could be causing the temperature to not be read?
....
Click to expand...

Hmm... that's interesting. It could be a faulty controller board or cable issue between the controller and hash board. What you can try doing is disconnect all but one hasboard (disconnect power and the data cables between 2 of the hashboards and the controller board - squeeze the little white connectors to disconnect them). Once you only have a single hashboard connected, boot it up and see if you experience the same issue. If you do, swap to another hashboard and disable the one that you had enabled and see if the issues persist. If they do then you likely have a controller board issue. Send a pic of the top of the miner if you like - I can point out what to disconnect etc. from that.

The fact that it's losing internet as well could be an indicator of a hashboard failure. It's quite possible it took a surge via the Ethernet port.

As for the remote access - you can definitely enable remote access to the machine by adding a port forwarding rule on your office firewall / router. Since you may be using port 80 already for web applications, I'd suggest picking an arbitary port that's unused - like port 8888 - and forward that to the antminer's IP address while converting it to port 80 on the antminer side. If you need help, I can help out, just pm me.
 
srothman said:
So my R32K deposit attracted a R160- deposit fee, which sucks, but yeah, order (finally) in for my BCH.

Edit: Just transferred my BCH into the address Bitmain provided. How long should I wait for an acknowledgement of sorts? I assume I'll get an e-mail?

Edit #2: So my payment was never processed, because I never got the mail with the confirmation link I needed to click from AltCoinTrader to withdraw my BCH to Bitmain's address. Now my Bitmain order got cancelled, and I needed to request ACT to not process the pending transaction. *sigh*
Click to expand...

Edit #3:
So after having cancelled the payment from ACT, now there is a hold on when I can do another withdrawal (I think it'll be fixed now, I think it's 24 hours). In any case, in the last 24 hours, the value of BCH has dropped, which means my S9 now costs more BCH than I bought (and I even bought a little bit extra, mind you to begin with). I'll check if it goes up enough to cover the cost, otherwise I'll just dump another grand or so in and get it done.

Bottom line, my S9 is still not ordered. Think the universe is trying to tell me something??? ;)
 
srothman said:
Edit #3:
So after having cancelled the payment from ACT, now there is a hold on when I can do another withdrawal (I think it'll be fixed now, I think it's 24 hours). In any case, in the last 24 hours, the value of BCH has dropped, which means my S9 now costs more BCH than I bought (and I even bought a little bit extra, mind you to begin with). I'll check if it goes up enough to cover the cost, otherwise I'll just dump another grand or so in and get it done.

Bottom line, my S9 is still not ordered. Think the universe is trying to tell me something??? ;)
Click to expand...

OOI... sorry man. But yeah, might be better to hodl or invest lol.
 
Slootvreter said:
So if anyone DOES put a D3 or S3 on the sidewalk, send me the GPS co-ordinates! :p
Click to expand...

I'm getting to that point lol... apparently so are half of Gumtree's users. I think R15k was the lowest price I saw.
 
Slootvreter said:
I'd take it for R3k5 :crylaugh: :p
Click to expand...

Let's see... at today's profitability, you'll have paid it off within 4 months... IF the price and difficulty don't change :crylaugh:
Sad...

Unfortunately for me, it's worth more to keep just for the spare fans in case my L3+ have issues lol.
 
manicminer said:
Let's see... at today's profitability, you'll have paid it off within 4 months... IF the price and difficulty don't change :crylaugh:
Sad...

Unfortunately for me, it's worth more to keep just for the spare fans in case my L3+ have issues lol.
Click to expand...

Exactly. A friend of mine is now in the same boat!
 
manicminer said:
OOI... sorry man. But yeah, might be better to hodl or invest lol.
Click to expand...

FML... yeah I'll hold BCH until it goes up enough to cover the purchase. I don't care much for BCH in general, and only bought it to pay Bitmain. Will see... maybe if XRP plummets I'll move some funds there ;)
 
srothman said:
FML... yeah I'll hold BCH until it goes up enough to cover the purchase. I don't care much for BCH in general, and only bought it to pay Bitmain. Will see... maybe if XRP plummets I'll move some funds there ;)
Click to expand...

I really don't understand why they don't offer other forms of payment, do they know something we don't?
 
dj2381 said:
I really don't understand why they don't offer other forms of payment, do they know something we don't?
Click to expand...

I think they speculate quite a bit, betting on whatever-coin to go up, and hording as the people buy. That's what I would do.
 
dj2381 said:
I really don't understand why they don't offer other forms of payment, do they know something we don't?
Click to expand...

Agree. It used to be LTC and BTC. BCH is their baby so I guess they have an interest in it becoming more powerful... though I think they underestimated the effort there.
 
Update: Order in! Fina-flippin-ly!
Managed to get the unit, PSU, and shipping in with ZAR35 to spare :P That puts the order at R32k, which is quite inflated, but at least it's done now.
Still beats the R54K-odd offers I've seen from some of the disties.
Now the dreaded wait starts....
 
srothman said:
Update: Order in! Fina-flippin-ly!
Managed to get the unit, PSU, and shipping in with ZAR35 to spare :P That puts the order at R32k, which is quite inflated, but at least it's done now.
Still beats the R54K-odd offers I've seen from some of the disties.
Now the dreaded wait starts....
Click to expand...

Does your order give an ETA? The last batch says shipping last weeks of Jan 2018, generally how long does it take to get here and past customs?
 
Just says 21-31 Jan, and PSU only says "January Batch". Hoping it's a tad sooner like with my L3+, but we'll see.
 
srothman said:
Just says 21-31 Jan, and PSU only says "January Batch". Hoping it's a tad sooner like with my L3+, but we'll see.
Click to expand...

I was thinking it will only leave them between 21 - 31 Jan and reach here a month or 2 later. I havent ordered from them so I dont know how they ship. I went the routine of ordering locally for 40k and my delivery date is before the 15th Jan (ordered on the 23rd Nov). I didnt mind the slight mark up knowing Ill get it sooner than the dispatch date on Bitmain.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X