The Home Improvements Thread (3)

DrJohnZoidberg said:
Old metal braai removed. We've decided to keep the hood in place as it simplifies things.

The guys are coming back on Saturday to finish the lintel and brickwork.

Can't wait to have a real braai again.

View attachment 1632287
Click to expand...
looking at redoing my built in braai (currrently sits too low and needs to be be moved up a bit, mind sharing some details of who you using to do it? All builders that have been reccomended to me in the past wont really look at such a small job. JHB based?
 
AmazeBalls said:
looking at redoing my built in braai (currrently sits too low and needs to be be moved up a bit, mind sharing some details of who you using to do it? All builders that have been reccomended to me in the past wont really look at such a small job. JHB based?
Click to expand...
I'm in Cape Town.

I just happened to find this guy Googling around for braai/fireplace construction and turns out he had done work at my house (prior to me buying it) before on the inside fireplace. I also had another guy that does small jobs for me but his quote was a lot more.
 
DrJohnZoidberg said:
Old metal braai removed. We've decided to keep the hood in place as it simplifies things.

The guys are coming back on Saturday to finish the lintel and brickwork.

Can't wait to have a real braai again.

View attachment 1632287
Click to expand...
Welcome to the get that kak megamaster outta here!

Busy building mine this holiday the levels etc.

Also contemplating replacing the thatch >_<

1702386395734.png
 
Snyper564 said:
Welcome to the get that kak megamaster outta here!

Busy building mine this holiday the levels etc.

Also contemplating replacing the thatch >_<

View attachment 1632743
Click to expand...
Looking nice.

I just had the thatch dressed and some parts fully replaced as it was cheaper than replacing the entire lapa roof. Plus it's really nice and cool in summer.
 
DrJohnZoidberg said:
Looking nice.

I just had the thatch dressed and some parts fully replaced as it was cheaper than replacing the entire lapa roof. Plus it's really nice and cool in summer.
Click to expand...
Thanks! Little torn as to whether to replace, patch go another route.

Many renovations at the moment :P
 
Mosgi said:
New wardrobe project loading…

We’re finally looking at installing walk in wardrobes for the main bedroom.

The space is a little unusual in its shape which will create some challenges along the designing for the angled wall.

Design inspiration is as below, with led strip down along the front side, and aluminium glass/acrylic doors.

93368f357450817e483f033764083d2a.jpg



a82f6c4aeff4272243f1b28aa3fe2659.jpg


This is the design made by Kingsman on the recent season of the Block - but also matches our scullery design a little, with the play between the black and natural wood tone. Challenge is the natural backing. Is there a way to get the same colour without having to buy a full 16mm board just for backing.

Doors:
Anyone have any views on picking between glass and acrylic, and a good supplier for the acrylic. Worried a little about the weight of the doors against the wood.

The recessed led channel will be a little challenging - I’ve found the A4/ A6 channel which meets the spec (can’t be too thick).
3455388ad1d0d756ef49c8dca5912ae7.jpg


I do however need to find the actual power supply, strips and lights

Looking for some form of cut, plug and play solution.

This kit seems solid and what was used on the cabinets above:

09bb177f8f03d8821b7b9443a8e2db36.jpg


Have mailed them for pricing but they don’t seem to service SA with these.
Click to expand...

Install day - cutting it close since no contractors from tomorrow COB.

55a415e385757a9ff92bca9db07dd73c.jpg


Didnt think there’d be so many panels.

db3bd65a62d23b17a3b33d6e67245804.jpg


Cnc grooved which was a bit of a hassle and impossible if you dont have a sample of the channel.

The gents now have
 
Decided to replace then remove then replace the thatch happening as we speak.

"After much contemplation and reflection I decided to just redo the thatch.

Dust etc is never an issue its cleaned twice a week by our domestic so thats never an issue, insurance prem doesnt change.


The structure is rock solid and at 13k vs 50kplus doesnt make sense at this moment.


If I decide to redo ill do it in years to come as this can be sorted in a few days. I have major renovations with home extension and kitchen overhaul so this will do and will do well till then."

1702541038781.png

Also have some pest control peeps out next week for the spraying of some bugs then plans also being finalsed by end dec and then major work on house and kitchen kicks of end jan/feb
 
Mannydefreitas said:
Stop using hot water.

Fit an extractor fan.

The paint used is incorrect.
Scrape as you said.
Make nice.
Paint ceiling with universal Undercoat - a light coat will suffice.
Then paint with a Eggshell Enamel.

Water-based paint can't withstand the heat & steam of your long hot showers.
Click to expand...
@SHL

I strongly suggest Plascon Velvaglo, by far the best in moisture-prone areas in my personal experience.

The water-based one is not bad, but the Enamel one would be the best in a bathroom

1702546844030.png
 
  • Like
Reactions: SHL
The_MAC said:
@SHL

I strongly suggest Plascon Velvaglo, by far the best in moisture-prone areas in my personal experience.

The water-based one is not bad, but the Enamel one would be the best in a bathroom

View attachment 1633681
Click to expand...
Thanks. I was looking at Dulux Bathroom+ but will consider the above now.
 
SHL said:
Thanks. I was looking at Dulux Bathroom+ but will consider the above now.
Click to expand...
Dulux bathroom+ works great and has the added benefit of mould inhibitors.. it's the only thing I use in my bathrooms I have repainted..
 
The_MAC said:
@SHL

I strongly suggest Plascon Velvaglo, by far the best in moisture-prone areas in my personal experience.

The water-based one is not bad, but the Enamel one would be the best in a bathroom

View attachment 1633681
Click to expand...

WAslayer said:
Dulux bathroom+ works great and has the added benefit of mould inhibitors.. it's the only thing I use in my bathrooms I have repainted..
Click to expand...
Would a universal primer be fine to apply after the old paint is scraped off? (Ceiling board is partially exposed)
 
Our house has some old school terracotta floor tiles which we really don't love that much. We're thinking about replacing the flooring (most likely Rhodesian teak parquet), but my question is whether it's worth trying to remove the tiles without breaking them? Is there some form of resale value for used tiles, or do I just take a mini breaker/jackhammer to them
 
Before I go to builders and get their assistance and get sold a R3000 sander let me seek some advice here as it's probably straight forward.

This is my wooden garage door:
1702567173575.png

As you can see after a rough winter and time (I've only owned the place for 2 years) it is due for some maintenance that I would like to do myself. I'd like to think I'm not an idiot and can do it myself but have not done any 'woodwork' since grade 9. To my eyes the wood still looks good but it needs to be saved now as another winter will do damage.

What will I need? Due to the large surface area I suppose I need a sander. Any recommendations? (cheaper the better)

Sand paper type?

Varnish type?

I guess the space in-between the slats needs to be done manually.

Thanks!
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X