Web Squad ISP

Status
Not open for further replies.
Is there something weird happening on the network in terms of shaping? Usenet is capped to <2MB/s until around 2200, then getting full speed after that. Only noticed it in the last few days while migrating stuff, it's been fine for the last few months :/

1649960039846.png

Also tested different usenet servers just in the event eweka was capping, getting the exact same speeds regardless of backbone.

Edit: Yeah I'm not imagining it, at exactly 2200 speeds are back up (still slow but a lot faster than the 1.4MB/s I've been getting)
1649967999017.png

Edit 2: Even benchmarked the HDD I'm using to download NZBs too in the event it was a drive speed issue and the drive was dying :(
1649973130126.png
 
Last edited:
DarkSt0rm said:
Is there something weird happening on the network in terms of shaping? Usenet is capped to <2MB/s until around 2200, then getting full speed after that. Only noticed it in the last few days while migrating stuff, it's been fine for the last few months :/

View attachment 1291860

Also tested different usenet servers just in the event eweka was capping, getting the exact same speeds regardless of backbone.

Edit: Yeah I'm not imagining it, at exactly 2200 speeds are back up (still slow but a lot faster than the 1.4MB/s I've been getting)
View attachment 1291896

Edit 2: Even benchmarked the HDD I'm using to download NZBs too in the event it was a drive speed issue and the drive was dying :(
View attachment 1291922
Click to expand...
Definitely nothing shaping from our end. We don’t have any mechanisms for shaping. NZB traffic is purely HTTPS traffic. So any shaping our side would affect all https traffic. Have you checked source? What’s the source IP? I can check how we reach them too.
 
DarkSt0rm said:
Is there something weird happening on the network in terms of shaping? Usenet is capped to <2MB/s until around 2200, then getting full speed after that. Only noticed it in the last few days while migrating stuff, it's been fine for the last few months :/

View attachment 1291860

Also tested different usenet servers just in the event eweka was capping, getting the exact same speeds regardless of backbone.

Edit: Yeah I'm not imagining it, at exactly 2200 speeds are back up (still slow but a lot faster than the 1.4MB/s I've been getting)
View attachment 1291896

Edit 2: Even benchmarked the HDD I'm using to download NZBs too in the event it was a drive speed issue and the drive was dying :(
View attachment 1291922
Click to expand...
What time does its start?
 
websquadza said:
Definitely nothing shaping from our end. We don’t have any mechanisms for shaping. NZB traffic is purely HTTPS traffic. So any shaping our side would affect all https traffic. Have you checked source? What’s the source IP? I can check how we reach them too.
Click to expand...
news.eweka.nl
europe.newsgroupdirect.com
are my 2 primary
r00igev@@r said:
What time does its start?
Click to expand...
I'll keep an eye out today but it starts late afternoon, around 1600/1700 if I had to guess. It's "fine" right now at around 14MB/s
 
DarkSt0rm said:
news.eweka.nl
europe.newsgroupdirect.com
are my 2 primary

I'll keep an eye out today but it starts late afternoon, around 1600/1700 if I had to guess. It's "fine" right now at around 14MB/s
Click to expand...
Speeds straight up halved at 1600. Went from 20MB/s constant to <10MB/s (around 8MB/s constant)

I have this nagging feeling its this stupid unifi gateway acting up yet again for some reason...
 
Last edited:
I'm also getting blackholed again when using NNTP

using news.tweaknews.eu

Reply from 176.124.71.34: bytes=32 time=222ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=225ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=223ms TTL=50
Reply from 176.124.71.34: bytes=32 time=226ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Reply from 176.124.71.34: bytes=32 time=222ms TTL=50
Reply from 176.124.71.34: bytes=32 time=226ms TTL=50
Reply from 176.124.71.34: bytes=32 time=221ms TTL=50
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Click to expand...

@DarkSt0rm seems I'm hitting my average speed of around 50MB/s, which I'd say is about expected for me.
1650058798056.png
 
Xzib1t said:
I'm also getting blackholed again when using NNTP

using news.tweaknews.eu



@DarkSt0rm seems I'm hitting my average speed of around 50MB/s, which I'd say is about expected for me.
View attachment 1292530
Click to expand...
Yeah, like now speeds are fine

1650061381822.png

It's really weird, dunno how to even try and figure out the speed changes. Can even get a full 100MB/s if I download onto SSD instead of HDD late at night
 
DarkSt0rm said:
Yeah, like now speeds are fine

View attachment 1292534

It's really weird, dunno how to even try and figure out the speed changes. Can even get a full 100MB/s if I download onto SSD instead of HDD late at night
Click to expand...
Those times are not random. Its precisely on the hour. Anything that can accelerate can also decelerate.
 
@websquadza my v4 just died? Running dualstack and anything running over v6 is fine:

This is the response from whatismyipaddress.com:

unknown.png
 
Something is seriously wrong, I am struggling to load Youtube videos all day, buffering and struggling to load which shows maybe a problem with Google services
 
I have the opposite problem, my IPv4 is detecting but IPv6 is showing as not detected even though it is enabled in my router settings?
 
DarkSt0rm said:
Speeds straight up halved at 1600. Went from 20MB/s constant to <10MB/s (around 8MB/s constant)

I have this nagging feeling its this stupid unifi gateway acting up yet again for some reason...
Click to expand...
Have you tried bypassing the Unifi again to see if this helps? Those times are odd - will try see how we're receiving that traffic and if anything could be affecting it there.

Xzib1t said:
I'm also getting blackholed again when using NNTP

using news.tweaknews.eu



@DarkSt0rm seems I'm hitting my average speed of around 50MB/s, which I'd say is about expected for me.
View attachment 1292530
Click to expand...
Still DDOS upstream protection being triggered in this regard. However, this is more on off than time/speed. Alternate transit route didn't help much due to added latency (via paris). But we are working on a solution to put this to good use.
 
Zodiak said:
Something is seriously wrong, I am struggling to load Youtube videos all day, buffering and struggling to load which shows maybe a problem with Google services
Click to expand...
No known issues. As always, have you checked for obvious packet loss / last mile? AEX issues aren't uncommon of late - so always check for packet loss. Beside's Google's issues of the past few weeks (which are mostly resolved now), it's more likely to be a line issue than peering/internet.

Zodiak said:
View attachment 1292996
Click to expand...
I thought you'd disabled this? If you re-enabled it, Tenda AC8 needs a reboot every now and again to keep v6 working well. We've engaged Tenda about this, but little feedback.
 
Status
Not open for further replies.
Back
Top
Sign up to the MyBroadband newsletter
X