Afrihost - Pure Fibre Feedback Thread

Status
Not open for further replies.
Can you try to see what colo you get on your phone's carrier? Either by importing the Warp config or using a hotspot.

Interestingly, after you mentioned it I tried it on my phone, and the Colocation center is listed as CPT. How on earth does that work?
 
Can you try to see what colo you get on your phone's carrier? Either by importing the Warp config or using a hotspot.

You can ignore me, for the most part imemoting from work into my computer at home.

This is from work, just fyi.

With Warp:
fl=136f6
h=www.udemy.com
ip=x.x.x.x
ts=1579695152.895
visit_scheme=https
uag=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36
colo=DUR
http=http/2
loc=ZA
tls=TLSv1.3
sni=plaintext
warp=on


Without Warp:
fl=113f6
h=www.udemy.com
ip=x.x.x.x
ts=1579695229.258
visit_scheme=https
uag=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36
colo=CPT
http=http/2
loc=ZA
tls=TLSv1.3
sni=plaintext
warp=off
 
You can ignore me, for the most part imemoting from work into my computer at home.

This is from work, just fyi.

With Warp:
fl=136f6
h=www.udemy.com
ip=x.x.x.x
ts=1579695152.895
visit_scheme=https
uag=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36
colo=DUR
http=http/2
loc=ZA
tls=TLSv1.3
sni=plaintext
warp=on


Without Warp:
fl=113f6
h=www.udemy.com
ip=x.x.x.x
ts=1579695229.258
visit_scheme=https
uag=Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36
colo=CPT
http=http/2
loc=ZA
tls=TLSv1.3
sni=plaintext
warp=off

Are you from CPT or DUR?
 
Your ISP is routing it wrong

My PC and my phone are both on my home network, one wired one WiFi.

I just checked the debug logs from the phone, got the IP address for the endpoint it was using, saved it into the .conf file for the PC and reconnected.. still JHB.
 
My PC and my phone are both on my home network.

I just checked the debug logs from the phone, got the IP address for the endpoint it was using, saved it into the .conf file for the PC and reconnected.. still JHB.

The endpoint IP doesn't matter, your ISP is routing those packets to the wrong place.
 
Just tested on the udemy.com address on the phone. Warp app on phone still says CPT, but Udemy confirms it's JNB. I have no idea anymore.
 
I'd try using Warp+ to see if the better routing makes a difference if you aren't already. But best of luck, from here I think Afrihost needs to work on the routing. Feel free to reach out via PM.

Tested Warp+ on the PC, same result. AH must be routing to JHB then, hopefully @AfriMan can get them to take a look.
 
Afrihost is still using Telkom transit for upload. There is increased latency 10.189.30.13 and that is likely because of all Telkom's down and uplink traffic still going via that route and it's congested. This could affect download speed on Afrihost even if the downlink traffic goes via Seacom if it's TCP traffic as the return packets go via Telkom. During peak time the latency increases more and there is some minor packetloss on the uplink on 10.189.30.13 so that would tank single threaded performance more and if you have packloss on your cable too from your cable provider good bye speed.
 
Afrihost is still using Telkom transit for upload. There is increased latency 10.189.30.13 and that is likely because of all Telkom's down and uplink traffic still going via that route and it's congested. This could affect download speed on Afrihost even if the downlink traffic goes via Seacom if it's TCP traffic as the return packets go via Telkom. During peak time the latency increases more and there is some minor packetloss on the uplink on 10.189.30.13 so that would tank single threaded performance more and if you have packloss on your cable too from your cable provider good bye speed.
I'm seeing the eassy link ip as 10.189.30.18
 
Status
Not open for further replies.
Top
Sign up to the MyBroadband newsletter
X