No display after installing new GTX960

P

peeryus

Senior Member
Joined
Oct 25, 2010
Messages
770
Reaction score
0
Hi all,

Wonder if someone can help.

I have just purchased and installed an MSi GTX960 Gaming 4G. I am not getting any signal via HDMI or VGA. The pc sounds to start up fine just like how it used to but now all LEDs light up etc. I've read that these are related to CPU utilisation.

I've installed the GTX960 into another pc and it works fine. I also installed an old but working 8600GT into both pci slots in my pc but still no display.

My motherboard has no onboard display ports. What could be the issue?

My specs are:

CPU: i5 2500k
Mobo: Gigabyte P67A UD4 B3
RAM: 16GB DDR3 1600
PSU: Huntkey AFPC 700W

Please assist. Thanks.
 
Stupid question but in CMOS Setup have to set the BIOS field Init Display First = PEG
 
Koosi said:
Stupid question but in CMOS Setup have to set the BIOS field Init Display First = PEG
Click to expand...
Is this possible without a display? Since I'm not getting any picture via gpu and have no onboard graphics port.
 
peeryus said:
Hi all,

Wonder if someone can help.

I have just purchased and installed an MSi GTX960 Gaming 4G. I am not getting any signal via HDMI or VGA. The pc sounds to start up fine just like how it used to but now all LEDs light up etc. I've read that these are related to CPU utilisation.

I've installed the GTX960 into another pc and it works fine. I also installed an old but working 8600GT into both pci slots in my pc but still no display.

My motherboard has no onboard display ports. What could be the issue?

My specs are:

CPU: i5 2500k
Mobo: Gigabyte P67A UD4 B3
RAM: 16GB DDR3 1600
PSU: Huntkey AFPC 700W

Please assist. Thanks.
Click to expand...

Remove and re-seat your memory?

Honestly sounds like either dead RAM modules or a faulty RAM slot. (Maybe non compatible RAM). Did you add new ram since replacing the GPU?
 
peeryus said:
Hi all,

Wonder if someone can help.

I have just purchased and installed an MSi GTX960 Gaming 4G. I am not getting any signal via HDMI or VGA. The pc sounds to start up fine just like how it used to but now all LEDs light up etc. I've read that these are related to CPU utilisation.

I've installed the GTX960 into another pc and it works fine. I also installed an old but working 8600GT into both pci slots in my pc but still no display.

My motherboard has no onboard display ports. What could be the issue?

My specs are:

CPU: i5 2500k
Mobo: Gigabyte P67A UD4 B3
RAM: 16GB DDR3 1600
PSU: Huntkey AFPC 700W

Please assist. Thanks.
Click to expand...

Rickster said:
With his old card I meant.
Click to expand...

Still no display even with the old card. I suspect he added new ram and it's either not compatible or faulty modules. Maybe re-seat the old ram and see if it works? Just a wild guess though.
 
Pitbull said:
Remove and re-seat your memory?

Honestly sounds like either dead RAM modules or a faulty RAM slot. (Maybe non compatible RAM). Did you add new ram since replacing the GPU?
Click to expand...
Nope same RAM. Old card was a GTX 550Ti and everything worked fine...
 
Pitbull said:
Still no display even with the old card. I suspect he added new ram and it's either not compatible or faulty modules. Maybe re-seat the old ram and see if it works? Just a wild guess though.
Click to expand...

Damn, I thought he was upgrading from the 8600GT, so im guessing this is a new build OP?
 
peeryus said:
Old card has been sold and buyer reports that it's working fine
Click to expand...

Jirre, that's a kark one :D

Maybe flash the BIOS with the jumpers on the board? And see if that works? You still have the Mobo installation disc with the drivers?
 
Last edited:
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X