Telkom LIT Android media box - Tips/Tricks/Apps thread

R

riscbroker

Expert Member
Joined
Sep 29, 2006
Messages
2,330
You can use an AV cable (if your TV has RCA in) as a temporary measure, but you'll have to find a newer TV/screen to hook up to so you can change the resolution on the box.
bebenl said:
I did the upgrade yesterday on my A06 box. I did a factory reset before carrying out the upgrade. It went to "Erasing", running the white circle, and then rebooted into a black screen (Samsung FHD). Hooking it up onto a computer screen does not produce any signal. I know these boxes can boot into recovery mode by powering on while pressing the switch inside the hole between the two USB ports but not even that works. I'll see if I can't find another TV to hook up to but I don't have access to a 4k screen :-(
Any ideas what else I can try?

@Nology: I sent you PM just now, please have a look into the issue.
Click to expand...
 
Enzo Matrix

Enzo Matrix

Honorary Master
Joined
Dec 15, 2006
Messages
13,813
bebenl said:
I did the upgrade yesterday on my A06 box. I did a factory reset before carrying out the upgrade. It went to "Erasing", running the white circle, and then rebooted into a black screen (Samsung FHD). Hooking it up onto a computer screen does not produce any signal. I know these boxes can boot into recovery mode by powering on while pressing the switch inside the hole between the two USB ports but not even that works. I'll see if I can't find another TV to hook up to but I don't have access to a 4k screen :-(
Any ideas what else I can try?

@Nology: I sent you PM just now, please have a look into the issue.
Click to expand...
Wtf were these clowns thinking. Did they not test properly
 
R

rabeckmann

New Member
Joined
Jul 16, 2015
Messages
5
Nology said:
Hi all, we are finalizing our testing on the A06 devices. Due to the A06 devices not having the same Wi-Fi chipset as the other devices (A11, B05 and B10) we had to implement a different set of drivers. As such, the A06 firmware version will be 8.2.39. This firmware version is in no way different to the firmware already released, except for the Wi-Fi driver.

We aim to start the A06 campaigns on Monday. We will keep you posted.
Click to expand...

Thanks for your hard work on the update, Nology, it is running netflix, showmax, kodi beautifully :)

Problem is I have a second device which has not been updated yet, is there any way to force the update?
 
K

kienah

Well-Known Member
Joined
Jun 1, 2007
Messages
422
I downloaded the latest Amazon Prime apk. Installed perfectly. However when opening it behaves the same way Netflix used to.. Mouse all over the place, can't select things. Etc.
Anyone manage to get Amazon Prime running well
Cheers
 
Soul Assassin

Soul Assassin

Honorary Master
Joined
Mar 27, 2006
Messages
11,212
kienah said:
I downloaded the latest Amazon Prime apk. Installed perfectly. However when opening it behaves the same way Netflix used to.. Mouse all over the place, can't select things. Etc.
Anyone manage to get Amazon Prime running well
Cheers
Click to expand...
You need to download the one used on the Shield.
 
K

kienah

Well-Known Member
Joined
Jun 1, 2007
Messages
422
On another note with Amazon Prime. Is it possible to only have shows and movies filtered by what is available in our country.

Frustrating when you see show and then not available.
 
M

Micdew

Well-Known Member
Joined
Jan 22, 2014
Messages
348
No news on when the a07 boxes that didnt get an update before will receive their updates?
 
B

bebenl

Member
Joined
Feb 23, 2009
Messages
10
riscbroker said:
You can use an AV cable (if your TV has RCA in) as a temporary measure, but you'll have to find a newer TV/screen to hook up to so you can change the resolution on the box.
Click to expand...

I probably had one of these cables lying around before the age of HDMI ;-) Otherwise where would I still get one? BTW, when I power on the box the TV still gives me a 1080@60Hz popup not an out-of-sync or anything.
 
M

milomak

Honorary Master
Joined
May 23, 2007
Messages
12,571
kienah said:
On another note with Amazon Prime. Is it possible to only have shows and movies filtered by what is available in our country.

Frustrating when you see show and then not available.
Click to expand...
i've never seen anything that has a filter

are you suggesting that amazon prime lists all shows regardless of your location and tells you only when you try to watch it?
 
A

anarchy007

Member
Joined
May 17, 2010
Messages
10
I'm having a problem with my A11 Lit box, everything works, updated to newest firmware. The moment I start watching Netflix about half an hour into it, the Lit box turns off my Samsung LED TV, any suggestions?
 
Dolby

Dolby

Honorary Master
Joined
Jan 31, 2005
Messages
32,628
milomak said:
are you suggesting that amazon prime lists all shows regardless of your location and tells you only when you try to watch it?
Click to expand...

It sounds like that's what he has already.

My current Amazon Prime only shows what is available .

I think yours may be doing it because you registered overseas or something. I had the same issue at one stage (I faked addresses and accounts all over, which confused their system it seems). I had to sort it out by mail and tell them to cancel everything with me and I started fresh
 
Dolby

Dolby

Honorary Master
Joined
Jan 31, 2005
Messages
32,628
anarchy007 said:
I'm having a problem with my A11 Lit box, everything works, updated to newest firmware. The moment I start watching Netflix about half an hour into it, the Lit box turns off my Samsung LED TV, any suggestions?
Click to expand...

Out of interest, turn off HDMI CEC and try again ?
 
J

jamesleslie

Member
Joined
May 16, 2018
Messages
15
i'm still very frustrated that since the update i cannot copy/cut and paste from internal storage to an external usb or sd card, when i try and it asks to choose external storage path it does nothing it just says task failed???
 
Akirky

Akirky

Expert Member
Joined
Jul 16, 2011
Messages
2,804
jamesleslie said:
i'm still very frustrated that since the update i cannot copy/cut and paste from internal storage to an external usb or sd card, when i try and it asks to choose external storage path it does nothing it just says task failed???
Click to expand...
Yep. It seems to be a new "feature" with Oreo - Turing your USB into a read only devise. It's like having a CD-R all over again.
 
A

anarchy007

Member
Joined
May 17, 2010
Messages
10
Dolby said:
Out of interest, turn off HDMI CEC and try again ?
Click to expand...
I know that CEC allows HDMI devices to control each other, that is the 1st thing I did and switched if off, and while sitting just on the home screen, it once again turned off my tv!
 
You must log in or register to reply here.
Top