Xbox Series X / S

Huh? It's only R300 more than the normal headset.

I suspect you remember pre-covid and USD/ZAR falling on it's arse pricing from when you originally bought it.


vs


Is more like R 700 if you wanna get technical ;)
 

vs


Is more like R 700 if you wanna get technical ;)

Suspect it’s a stock clearance price that since nobody else seems to have stock at present.

When I bought the Starlink one a few weeks ago it was only a few hundred rand difference between all resellers.
 
Suspect it’s a stock clearance price that since nobody else seems to have stock at present.

When I bought the Starlink one a few weeks ago it was only a few hundred rand difference between all resellers.

Game4U had it on sale for R1999 last week. Was this close to hitting buy but opted to wait for next month and get Starfield's

Edit: Will cut Ver 2.0 when I have time tomorrow:
1692105578175.png
The reason I don't do this stuff, cause I always wanna change things...
I blame @Lupus
 
Last edited:
I am buying one of these second hand this weekend:


I know it is not force feedback, but I am paying way less than the advertised price above, R1500

I will like to know if one of these will work as a steering wheel rest to play.


or does anyone have any cheap alternate options. I do not want to spend R5000 on a play seat as yet.
 
I am buying one of these second hand this weekend:


I know it is not force feedback, but I am paying way less than the advertised price above, R1500

I will like to know if one of these will work as a steering wheel rest to play.


or does anyone have any cheap alternate options. I do not want to spend R5000 on a play seat as yet.
Yeah those don't work on lapdesks, going to need something sturdy to put it on
 
ja I want to know the answer to this question as well. Left Bumper button has broken again on a second controller....would really prefer a solid fix than needing to buy another one!
Hi,

So I the guy I initially spoke about here called me and said he is working from home today, took the controller to him.
End result, R700 later - working controller - he showed me pics of the inside of the controller, rubbers were broken, things where worn to hell - so ultimately, if I just spent a bit more I could've bought a new new controller, but I had it repaired and it's working fine.
 
Hi,

So I the guy I initially spoke about here called me and said he is working from home today, took the controller to him.
End result, R700 later - working controller - he showed me pics of the inside of the controller, rubbers were broken, things where worn to hell - so ultimately, if I just spent a bit more I could've bought a new new controller, but I had it repaired and it's working fine.

ask 1st ..i would pay R200 or buy a new controller to be honest
cos can get controlers for like R800-R1000 if lucky brand new
 
I am buying one of these second hand this weekend:


I know it is not force feedback, but I am paying way less than the advertised price above, R1500

I will like to know if one of these will work as a steering wheel rest to play.


or does anyone have any cheap alternate options. I do not want to spend R5000 on a play seat as yet.
As someone who has tried to take the shortcut...don't bother buying the wheel unless you are going to do the full effort of a racing seat or have a very very solid desk you plan to mount it on.

It simply does not work with a lap desk or anything that isn't rock solid.
 
As someone who has tried to take the shortcut...don't bother buying the wheel unless you are going to do the full effort of a racing seat or have a very very solid desk you plan to mount it on.

It simply does not work with a lap desk or anything that isn't rock solid.
Yup this, currently the wheel is somewhere in the house
 
Yeah you can literally buy all the tools you need and the replacement parts for virtually no money and go to iFixit.com and follow the instructions.

R700 is madness.
Depends on the issue, do you want to sit and solder the bumper buttons? Or the D-Pad? I've taken a few controllers apart myself, but for those intricate soldering, I'll take it to a guy who has the microscope and the soldering iron to do it with.
 
Depends on the issue, do you want to sit and solder the bumper buttons? Or the D-Pad? I've taken a few controllers apart myself, but for those intricate soldering, I'll take it to a guy who has the microscope and the soldering iron to do it with.
Certainly, I seem to recall the bumpers are just an all-in-one replacement though? Haven't personally had them fail.

Never seen a D-pad fail.

But yes check the guides beforehand and see what is involved but I find the most common issue people replace entire controllers for is just worn analog sticks or sticky buttons that generally just need a clean.

Dirt is usually the biggest enemy and most stuck bumpers are a case of some compressed air without actually even opening the controller.

Once in a while the spring on the analog stick dislodges and is easy enough put back in place.
 
Certainly, I seem to recall the bumpers are just an all-in-one replacement though? Haven't personally had them fail.

Never seen a D-pad fail.

But yes check the guides beforehand and see what is involved but I find the most common issue people replace entire controllers for is just worn analog sticks or sticky buttons that generally just need a clean.

Dirt is usually the biggest enemy and most stuck bumpers are a case of some compressed air without actually even opening the controller.

Once in a while the spring on the analog stick dislodges and is easy enough put back in place.
That is the bumper switch, those are about 30 bucks to replace but they are soldered on to the back. For the analogues when they start to drift it's normally the 3d sensor that is packed in, also about 30 bucks. Can replace the whole analogue for 60 bucks.
Excuse the dust this is an old Xbox One controller that's been sitting on my desk with a broken LB for about 6 months.
IMG_20230816_104838.jpgIMG_20230816_104905.jpgIMG_20230816_105159.jpg
 
Certainly, I seem to recall the bumpers are just an all-in-one replacement though? Haven't personally had them fail.

Never seen a D-pad fail.

But yes check the guides beforehand and see what is involved but I find the most common issue people replace entire controllers for is just worn analog sticks or sticky buttons that generally just need a clean.

Dirt is usually the biggest enemy and most stuck bumpers are a case of some compressed air without actually even opening the controller.

Once in a while the spring on the analog stick dislodges and is easy enough put back in place.

Only problems I've had with my previous controllers have been stick drift and some of my buttons that start to get a little tight.

The first thing i always do that tends to work well for general maintenance is open the top shell and clean it using pure surgical spirits and a q tip and or those small makeup brushes that the wife has laying in her makeup bag.

But most of part failures happen when we drop the controller off the desk or couch a lot. It tends to land on the bumpers or sticks most of the time.

I try not to eat chips or anything oily while gaming and a water based wet wipe clean once a week keeps the controller clean and dry/oil free.
 
Only problems I've had with my previous controllers have been stick drift and some of my buttons that start to get a little tight.

The first thing i always do that tends to work well for general maintenance is open the top shell and clean it using pure surgical spirits and a q tip and or those small makeup brushes that the wife has laying in her makeup bag.

But most of part failures happen when we drop the controller off the desk or couch a lot. It tends to land on the bumpers or sticks most of the time.

I try not to eat chips or anything oily while gaming and a water based wet wipe clean once a week keeps the controller clean and dry/oil free.
If you'd seen my sons controller the other day :-). I took it apart and gave everything a clean, vacuum + soaked things. Electrical contact cleaner, isoproypol alcohol, disinfectant for other things. 11 years will eat and play, that all ends up in the controller.
 
If you'd seen my sons controller the other day :). I took it apart and gave everything a clean, vacuum + soaked things. Electrical contact cleaner, isoproypol alcohol, disinfectant for other things. 11 years will eat and play, that all ends up in the controller.

you in cpt ?

i need my controllers to be cleaned :D
 
As someone who has tried to take the shortcut...don't bother buying the wheel unless you are going to do the full effort of a racing seat or have a very very solid desk you plan to mount it on.

It simply does not work with a lap desk or anything that isn't rock solid.

I am going to invest in a Logitech steering wheel with force feedback and a play seat at a later stage.

I just wanted something to get used to in the mean time as I have used a steering wheel before and found it incredibly difficult to use.

I managed to get it this morning and so far so good.

Got it connected to my upstairs Xbox as there is an office table there.

Do far no regrets with this cheaper option to start with.
 
Top
Sign up to the MyBroadband newsletter
X