Does anyone know how to see what the usage is of 3g is.. instead of plugging the Sim in a phone and dial *147# to get the available balance.
I got the MR3420 and Cell C 5Gb Black one.
Doesn't cell c have it on their website? like Vodacom that you see available amount?

Doesn't the router firmware report on this - a la Tomato/DD-WRT?
 
Maybe not looking in right place.
Under the 3g settings. where you can view the singal strenth of the device? it only shows the current amount send and received.
the moment I disconnects it rests to 0
 
Did some Searching TP-Link TL-MR3420
dd-wrt Not Supported
Tomato Not Supported
So no hope there
 
Does anyone know how to see what the usage is of 3g is.. instead of plugging the Sim in a phone and dial *147# to get the available balance.
I got the MR3420 and Cell C 5Gb Black one.
Doesn't cell c have it on their website? like Vodacom that you see available amount?

Open Cell C connection manager

Click on Services

Select Self Service from drop down menu (left of Send button)

You get the same menu option as on your phone with Sim card
 
Ya thanks that’s bit faster, but still will need to remove the modem from the router then plug it in at the pc.
My router and 3g is in the roof. got 98% signal strength.. so climbing in and out.. not my idea of exercise.
 
Ya thanks that’s bit faster, but still will need to remove the modem from the router then plug it in at the pc.
My router and 3g is in the roof. got 98% signal strength.. so climbing in and out.. not my idea of exercise.

If you go back a couple of pages, they tried to get this option installed/upgraded on the routers, but the manufacturer declined.

So this option is not available at the moment, but I believe you'll be able to see your stats on the Cell C website in the near future.

ginggs mention this somewhere.

My router and 3g is in the roof. got 98% signal strength.. so climbing in and out.. not my idea of exercise.

That is definitely an issue for those that use this router on the roof.

Found it: (Page 23)

Hey guys, I really am sorry that we we're not able to get the USSD support added, we did try, its sometimes difficult to explain to a big manufacturer the benefits of having features like this added to their product.
 
@Madhawk
Thank you for the info.

Will do the ceiling climbing once a week and near end of month just copy each connection status and add the number together, tnx excel..
Can’t wait to get Home.. No money(January sucks), fortunately internet and Ps3 to keep me sane.
 
Picked up my TP-Link UC100 USB cradle this morning. Thanks kernel. Brought a work colleague with me who bought two Tl-MR3220s, so the marketing is working.
My TL-MR3220 works well with my Cell C 1820 stick. Bye bye ADSL!

I suspect the USB 2 cable/cradle is not compatible with the E1820. The cable causes detection problems on my laptop and also when using it with my MR3420 sometimes it loses detection and the router status changes to "identifying modem".
 
Just ordered my TP MR3220 router. I don't use wireless at all so there's no point in taking the more expensive one. I just hope this resolves my Cell C vs PS3 disconnect issue.

Edit: Crap, I quoted my PS3ZA username by mistake, hope I can rectify that :/
 
Last edited:
Ya thanks that’s bit faster, but still will need to remove the modem from the router then plug it in at the pc.
My router and 3g is in the roof. got 98% signal strength.. so climbing in and out.. not my idea of exercise.

That you gonna need something like Netlimiter or ISpMonitor. The TP Link does not support the checking balance via the router.
 
I suspect the USB 2 cable/cradle is not compatible with the E1820. The cable causes detection problems on my laptop and also when using it with my MR3420 sometimes it loses detection and the router status changes to "identifying modem".

Make sure the USB cradle is plugged into a highspeed usb port. The ones at the back of the PC.
 
But he also seems to experience the same problem with the router.

The TP-Link USB cable works fine with my 3220 router and E1820 stick. The signal strength increased from 77% to 87% and the bonus is that two heat sources are now seperated :-) I have the router connecting the 3G stick on demand and have had up to 3 wireless devices active simultaneously. No disconnects or throughput problems.

I also plugged the extension into my pc and it also worked fine. I wanted to see what 87% translated into in db and saw -55 in the Cell C tool diagnostics.
 
Top
Sign up to the MyBroadband newsletter
X