Huawei B970/B970b HSPA Router

I just got my router back from VodaCare. It seems there is hope for those who brick their routers with the SP4 update. The special folk up in Midrand managed to resurrect my router by reflashing it. How they did it I don't know, but with no release notes, upgrade instructions or any more detail than "Software upgrading" on the job sheet I can only predict they will shortly be in a state where they can fix these routers with their eyes closed.

I am once again immensely disappointed with VodaCare Canal Walks' lack of respect for my property, more on that later when I have had a chance to take some pictures of their manhandling and test my router.
 
@HowTo: Here is my log which does not look anything like yours. It also appears that your log is either old or your system time is horribly out of date (2009-6-16). I suspect you have the logs of a previous E272 update as spotted by ginngs :)

2010011715:12:00: DIAG_HandShake: (0,0)
2010011715:12:00: Firmware Version: 256.11.10.04.111
2010011715:12:00: Dashboard Version: VMCLite_9.3.3.10523_RC3
2010011715:12:06: ++++++++++++++++++++++++++++++++++++++++++++++++++
2010011715:12:06: 00-1E-10-86-A4-13
2010011715:12:09: Sending router module's update data
2010011715:12:10: Waiting router updating
2010011715:12:14: TCP_GetRouterResult's ElapsedTime = 4071 ms
2010011715:12:14: Download success(00:08)
2010011715:12:17: Sending router module's update data
2010011715:12:25: Waiting router updating
2010011715:13:46: TCP_GetRouterResult's ElapsedTime = 80169 ms
2010011715:13:46: Download success(01:32)
2010011715:13:49: Sending router module's update data
2010011715:13:50: Waiting router updating
2010011715:14:01: TCP_GetRouterResult's ElapsedTime = 10514 ms
2010011715:14:01: Download success(00:15)
2010011715:14:02: Erase router module's NVRAM
2010011715:14:21: Execute#1> Read Fail
2010011715:14:27: Execute#2> Read Fail
2010011715:14:33: Execute#3> Read Fail
2010011715:14:33: DIAG_HandShake: Write or Read Fail
2010011715:14:33: Handshake fail(00:32)
2010011715:12:00: DIAG_HandShake: (0,0)
2010011715:12:00: Firmware Version: 256.11.10.04.111
2010011715:12:00: Dashboard Version: VMCLite_9.3.3.10523_RC3
2010011715:12:06: ++++++++++++++++++++++++++++++++++++++++++++++++++
2010011715:12:06: 00-1E-10-86-A4-13
2010011715:12:09: Sending router module's update data
2010011715:12:10: Waiting router updating
2010011715:12:14: TCP_GetRouterResult's ElapsedTime = 4071 ms
2010011715:12:14: Download success(00:08)
2010011715:12:17: Sending router module's update data
2010011715:12:25: Waiting router updating
2010011715:13:46: TCP_GetRouterResult's ElapsedTime = 80169 ms
2010011715:13:46: Download success(01:32)
2010011715:13:49: Sending router module's update data
2010011715:13:50: Waiting router updating
2010011715:14:01: TCP_GetRouterResult's ElapsedTime = 10514 ms
2010011715:14:01: Download success(00:15)
2010011715:14:02: Erase router module's NVRAM
2010011715:14:21: Execute#1> Read Fail
2010011715:14:27: Execute#2> Read Fail
2010011715:14:33: Execute#3> Read Fail
2010011715:14:33: DIAG_HandShake: Write or Read Fail
2010011715:14:33: Handshake fail(00:32)
2010011715:15:20: DIAG_HandShake: (0,0)
2010011715:15:20: Firmware Version: 256.11.10.04.111
2010011715:15:20: Dashboard Version: VMCLite_9.3.3.10523_RC3
2010011715:15:27: ++++++++++++++++++++++++++++++++++++++++++++++++++
2010011715:15:27: 00-1E-10-86-A4-13
2010011715:15:31: Sending router module's update data
2010011715:15:31: Waiting router updating
2010011715:17:02: TCP_GetRouterResult's ElapsedTime = 90855 ms, Result = 3
2010011715:17:02: Router's response indicate fail(01:35)
 
@morkhans,
Well it seems to me it never generated a log file, trying to upgrade.
The result I have given you was then my old E272 modem.
I tried two diffrent ways.
1) Using the application supplied.
2) Using the file upgrade within the vodafone application.

Sorry for the confusion.
 
VodaCare Is truely useless on an epic level

I just got my router back from VodaCare. It seems there is hope for those who brick their routers with the SP4 update. The special folk up in Midrand managed to resurrect my router by reflashing it. How they did it I don't know, but with no release notes, upgrade instructions or any more detail than "Software upgrading" on the job sheet I can only predict they will shortly be in a state where they can fix these routers with their eyes closed.

I am once again immensely disappointed with VodaCare Canal Walks' lack of respect for my property, more on that later when I have had a chance to take some pictures of their manhandling and test my router.

I was obviously too optimistic. Plugged my router in and it's in exactly the same state it was when I sent it in. The LAN nor the WLAN initialize when the router boots, so I am VERY curious to know exactly what the monkeys up in Midrand did, because they clearly have not fixed the router or for that matter tested it correctly. :mad: :mad: :mad: :mad:
 
What about the USB port?

I have to assume that's all they tested. I am so fscking angry at this point I could spit. This means another week plus without my router once I have the strength to go back to VodaCare....
 
That's shocking morkhans!! Hopefully VodacomData can sort something out or speak to someone. They should have tested it in the shop with you standing there.
 
That's shocking morkhans!! Hopefully VodacomData can sort something out or speak to someone. They should have tested it in the shop with you standing there.

Hi

The testing lab confirmed that the upgrade is working and upgrade was successful, release notes should be up soon.

Regards
VodacomData
 
Last edited:
Hi

The testing lab confirmed that the upgrade is working and upgrade was successfully, release notes should be up soon just.

Regards
VodacomData

I meant help morkhans with the shocking service he got from the VodaCare.
 
Hi

The testing lab confirmed that the upgrade is working and upgrade was successfully, release notes should be up soon just.

Regards
VodacomData

You drinking on the job? :p

Looking forward to the instructions....
 
You drinking on the job? :p

Looking forward to the instructions....

Please note that the B970 firmware is back on the Vodacom.co.za website and now includes the upgrade user guide.

This is the same firmware that we used to successfully upgrade our router.


Regards
VodacomData
 
Please note that the B970 firmware is back on the Vodacom.co.za website and now includes the upgrade user guide.

This is the same firmware that we used to successfully upgrade our router.


Regards
VodacomData

It is still missing crucial information like the fact that you need to be attached to the router using a LAN cable and that if you have changed your internal networking from the default you may have to reset the device before the update will work. It also makes no mention if you should remove your SIM or disable Wifi, things that all could be relevant. A list of bugs fixed would also have been nice. Excluding the missing steps this is exactly the procedure I followed when my router bricked.

My present advice to anyone reading this is to stay away from this update unless you are experiencing the loss of settings bug very often.
 
Last edited:
Huawei B970 3G Router - Unable to specify APN

Hello All,

I just purchased a Huawei B970 3G router and completed the setup successfuly.

A have a SIM that is registered on the "unrestricted" APN for VPN etc, the problem is that I can;t seem to find a way to specify the APN on the B970, under the profiles you can see the APN as "internet", but it is greyed out and I am unable to specify anything else.

Has anyone else encountered this ?
 
Hello All,

I just purchased a Huawei B970 3G router and completed the setup successfuly.

A have a SIM that is registered on the "unrestricted" APN for VPN etc, the problem is that I can;t seem to find a way to specify the APN on the B970, under the profiles you can see the APN as "internet", but it is greyed out and I am unable to specify anything else.

Has anyone else encountered this ?

You need to create a custom profile under one of the other menu options. My router is in for repair so I can't check it for you, but it does exist.
 
Excuse my ignorance, but what exactly does the firmware upgrade do?

Can I now connect at 21Mbps to Vodacom's network in Midrand? :)
 
Excuse my ignorance, but what exactly does the firmware upgrade do?

Can I now connect at 21Mbps to Vodacom's network in Midrand? :)

It's supposed to fix (amongst other things) the issue where the router loses all its settings, which I have experienced before.
 
Hi All,

I did the upgrade for the B970 router.
At first it would not upgrade.
Problem was connected to Vodacom. After disconnecting all went straight forward.
I did a total reset to the B970 router. Installed all settings via ethernet connectivity. Works better.
Changed all my settings which is applicable to me.;)

Up and running all ok.
 
Top
Sign up to the MyBroadband newsletter
X