The Huawei B593 LTE discussion thread

Hey, guys. I registered here specifically to ask this question. I have this router, and it's very good. Except about once a week the following happens; suddenly my laptop and phone would disconnect from the Wi-Fi signal although I can see it, I try to connect to it but I can't. I tried 2 phones and 2 laptops, I can't connect to it. I have to go turn it off manually, turn it back on and it's fine. The problem would happen a week or so later again and I do the same thing. My phone says it's an authentication issue.
Any idea why this happens? Thanks.
 
Hey, guys. I registered here specifically to ask this question. I have this router, and it's very good. Except about once a week the following happens; suddenly my laptop and phone would disconnect from the Wi-Fi signal although I can see it, I try to connect to it but I can't. I tried 2 phones and 2 laptops, I can't connect to it. I have to go turn it off manually, turn it back on and it's fine. The problem would happen a week or so later again and I do the same thing. My phone says it's an authentication issue.
Any idea why this happens? Thanks.

You not alone also have the same problem on my router! Sometimes can take 2 -3 minutes for the router to allow me to access the web management page. It's frustrating at time - doesn't happen frequently but do reset the router regular.


Firmware needs to be updated.

CWMP Update
To upgrade CPE Software by CWMP, please click CWMP Update button .

I click on the update nothing happens! I think Telkom Mobile are blocking the ports, tomorrow will go to Telkom Mobile to see if they able to assist me

routerupdate.JPG
 
Last edited:
I resolved all WiFi issues by building a Ubiquiti UniFi system. I actually realise now there was nothing wrong with my previous Huawei 3* WS322 repeater setup.
 
Last edited:
The wireless would stop working. I had to reboot to fix it. I think the underlying issue is the WLAN on the B593 itself, as you guys have found as well.
 
In my humble opinion, fallback is not required. Because the B593 is typically for a fixed installation, roaming is a non issue. In fact, you set the service to always use LTE and never 3G.

In 8 months I've only once been affected by tower maintenance and it lasted a few hours. Lucky for me I still picked up 1 bar LTE signal from another tower which was perfectly usable. So I never ever use 3G.

However, the case for a B593 that supports all LTE bands is strong. Because you're typically piggy backing off an MTN tower, you will have a great MTN LTE experience as well. With Afrihost, using MTN LTE is almost as cost effective as Telkom Mobile. Upload speeds are also triple.

Therefore a B880 might be a great choice but so far it doesn't look like a very robust device to me. I'd like to see one in the flesh.

If you can't wait and are happy with Telkom Mobile at your house, go ahead and grab a Telkom Mobile issue B593. :)
 
... So what is the verdict based on LTE/4G only or LTE/4G with 3G fall-back?

Here is another option to consider which works very well for me. I use a TP-Link WR1043ND V2 wireless router using ROOter firmware. LTE is via an Huawei E3276-920 cat4 modem (with 3g fallback) plugged into the router. The E3276-920 model is for Telkom. The Huawei E3276-150 modem will cover the other networks. The WR1043ND has very good Wi-Fi (3 external antennas), gigabit LAN and a 1.5A power supply (good for modem power). I mention Wi-Fi because I hear that the B593 does not have good Wi-Fi.

Costs:
TP-Link WR1043ND V2 for about R850 (incl VAT and delivery)
Huawei E3276 modems from eBay are about R600 - R850 (which is where I got mine).

The above setup for me is rock-solid.
 
Last edited:
Thank you Azimuth, I appreciate your opinion.
 
Last edited:
Thank you 1geoff99, I appreciate your opinion.
 
Last edited:
Are you using external antennas on the stick?

Yes, I'm using 2 external antennas.

By the way, you can install ROOter on your TP-Link MR3420 if you want to see what it's like. It will then be able to handle 4g/LTE modems. The only functionality you will lose is 3g/WAN failover because the MR3420 does not have enough flash memory to include that feature.

I'm not sure why you want both a MikroTik and a B593. It seems to me that the setup I described above with 2 modems could satisfy all your requirements (with a usb hub it can have 2 modems plugged in at the same time, with failover if you like).
 
are you telling me that the TP-Link MR3420 do not support 3g/4g out of the box? I never knew that, it states so on the box. Weird, I only use 3g stick on it anyway, but now that you have mention it I am going to try it at a later stage.

You mentioned your combo was outdated, so I assumed you had version 1 of the MR3420, which does not support 4g (unless you put ROOter on it). But if you have version 2, then it will support 4g.

I can't comment further on your preferences for the MikroTik or the B593 because I have no personal experience with those devices. I was just providing you with information about a setup which I know works very well and should provide similar functionality to what you require, but at a cheaper price.
 
Last edited:
Top
Sign up to the MyBroadband newsletter
X