3G/HSPA/LTE Routers

Clintlub said:
Hi. I got the D-link 2750U yesterday. Took a few minutes to hook up and it's working perfectly.Connecting to the internet via my 8ta sim in a cellc dongle. Got my notebook and galaxy sII hooked up via wifi. My only question is - is there an app out there that will tell me my bandwidth usage, without having to unplug the dongle and running the 8ta management tool from my pc? Thanks
Click to expand...

use this http://home.8ta.com/my8ta after registering
 
The best 3G router is not even listed on the first page?

Where is the Huawei B683?

Been using it now for two months and it is just a fantastic piece of hardware. Briliant!
 
The Huawei B683 has the latest 802.11 b/g /n wifi standard, so the full 21Mbps of HSPA+ can be fully exploited by the wifi clients. An external (SMA) antenna connector is provided for connecting external 3g antennas to boost the signal.

HSPA + (High Speed ​​Packet Access Plus) 2100/900, 2100/850, 1900/850 MHZ
HSUPA (High Speed ​​Uplink Packet Access)
HSDPA (High Speed ​​Downlink Packet Access)
WCDMA (Wideband Code Division Multiple Access) 2100/900, 2100/850, 1900/850 MHZ
GSM (Global System for Mobile Communications) 850/900/1800/1900 Mhz
GPRS (General Packet Radio Service (System) 850/900/1800/1900 Mhz
EDGE (Enhanced Data Rates for Global Evolution) 850/900/1800/1900 Mhz

Specifications:

WPS
RJ45: 4 Lan ports
External 3g antenna interface
802.11b/g/n
180x123x32.5 mm
USB 2.0 host interface - can mount external drive
Built-in DHCP Server, DNS RELAY and NAT
Convenient web-based management
Windows 2000/Windows XP / Windows Vista / Windows 7
User Status LED indicators.
Receiving diversity and load equalizer
Built-in WCDMA / GSM WLAN high gain antenna
Suitable for: HSPA + / HSUPA / HSDPA / WCDMA / GSM / GPRS / EDGE
Provides immediate protection from potential security threats and block intrusion attempts.
High speeds. Supports data services from a maximum speed of HSPA + (28Mbit DL / s; UL5.76Mbit / s), HSPA (DL 7.2Mbit / s; UL5.76Mbit / s), 384kbit / s WCDMA, 236.8kbit / s EDGE, and 85.6kbit / s GPRS
 
has anybody tried the new firmware for the MR3420? mr3420v1_en_3_12_21_up(120508).bin

http://www.tplink.com/en/support/dow...rsion=V1#tbl_j

Something I however did after upgrading was to reset router to factory defaults and set it up again - never normally do this...

I'm busy testing it on my K4505-Z and it has been up for more than 18hrs now - seems to have addressed some of the problems with this modem at least - will still test it with E1820 and MF668
 
Hi, anyone with a modem bin file for the ZTE K4510-Z. I am using the TP-Link MR3020. I already tried TP-Link support but without any success. Thanks in advance.
 
As a follow-up to my post above, this is the response from ZTE support regarding this modem:

Our product K4510-Z doesn't support to work with routers.

And we can't give you the AT commands because of information security policy of ZTE.

Best Regards!
 
jhbhacker said:
Hi, anyone with a modem bin file for the ZTE K4510-Z. I am using the TP-Link MR3020. I already tried TP-Link support but without any success. Thanks in advance.
Click to expand...

The K4510-Z is not listed on the compatibility list but we've had some clients who managed to get it to work, firmware version 110617 is the one it works with.

Send me a PM with your email address and I'll email you the file.
 
kernel said:
The K4510-Z is not listed on the compatibility list but we've had some clients who managed to get it to work, firmware version 110617 is the one it works with.

Send me a PM with your email address and I'll email you the file.
Click to expand...

Hi kernel. I searched this morning and could not find a bin file posted since your last post here. I will try the K4510 in my router later, but was wondering if anyone has come up with a bin file for this modem for the MR3420?
 
Bundu said:
have you tried the latest FW? TL-MR3420_V1_120508
Click to expand...

No not yet ... I am picking up the modem this afternoon and I am just enquiring in advance. I do have the new FW, but on the sites the modem is not included in the compatibility lists.
 
OGroteKoning said:
Hi kernel. I searched this morning and could not find a bin file posted since your last post here. I will try the K4510 in my router later, but was wondering if anyone has come up with a bin file for this modem for the MR3420?
Click to expand...

There is unfortunately no bin file for this particular model
 
Just as an infomercial:

I finally settled on a Netgear DGN2200M-100PES for my Vodafone K4605 (Rebranded to E372) to use with my 8ta, and it works like a charm! 5mbps down, 2mbps up, nice and constant!
 
Does anyone have a working bin file for K4510-z to use with TP-Link MR3420. I tried all the firmwares available and no luck
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X