Cool Ideas Fibre ISP - Feedback

Status
Not open for further replies.
ekske1 said:
testmy.net does that for you, even with manual sizes and single or multi thread
Click to expand...
We are testing from the source dude ! That link is given to us by RD themselves to test our speeds to their services. Test.my is not going to test that for me. We are not testing general speed.
 
Also very interesting that the CISP site under the network status shows posts made on the 14th when today is the 13thcisp.jpg
 
Fjorko said:
@Looney - Try to download this and tell me what speed it comes down at. Then we will try it again later tonight.

http://30.download.real-debrid.com/speedtest/test.rar

This has become a mission for me and I want to find out what the issue is here....

Also - if anyone knows of a buddy out there that has fibre - but not with CISP - give them that link and ask them to report the download speed. Give as much detail as you can i.e

Mine is listed below :

Time: 20:07
Speed Achieved after 2 min: 949KB/s
Test Device: Lenovo Laptop
Wifi/Ethernet: Wireless AC @ 600Mbp/s
ISP: CISP
FLP: Openserve
Package:100/50
Click to expand...


-------------------------------------------------------------------------------------------------------------------------
Sorry I did not do the complete file, did 1GB quick to see @ 20:15

1542133248810.png
Speed Achieved: Jumps between full line speed and 4MB/sec
Test Device: Desktop
Wifi/Ethernet: 1Gbps cable
ISP: CISP
FLP: Vuma Trenched CT
Package:50/50
 
jvrs said:
-------------------------------------------------------------------------------------------------------------------------
Sorry I did not do the complete file, did 1GB quick to see @ 20:15

View attachment 578358
Speed Achieved: Jumps between full line speed and 4MB/sec
Test Device: Desktop
Wifi/Ethernet: 1Gbps cable
ISP: CISP
FLP: Vuma Trenched CT
Package:50/50
Click to expand...

Thats cool - just need about 2 mins so it can get up to speed - that's a good speed actually - can easily stream 4K with that
 
joker08 said:
@PBCool vumatel installed the CPE and I am getting an orange light on it. the vumatel home page comes up when i connect my computer to it. What should I do next ?
I understand u need to send a router to me but in the meantime can I connect using a Lan cable ?
Click to expand...
So tempted to click, if I am getting this page why can't I connect to the internet right now. This is the same package I signed up for, so if I click activate it shouldn't be a problem right ?
I just don't want to break anything
c829a6cc4d0b94bd0f305476fb15c13d.jpg
 
KantSnyer said:
Can game at the moment to UK but feels off, like packet loss. Is this a bad loss percentage?
View attachment 578368
Click to expand...
Download winmtr and do a complete trace to see where the packet loss is.
For comparison, I get 0% to that same ip address:
Code: 
Size Range: 28-4470, < 0:random.
 Host                                     Loss%   Snt   Last   Avg  Best  Wrst StDev
 1. router.lan                             0.0%    25    0.2   0.2   0.1   0.3   0.0
 2. 155.93.227.1                           0.0%    25    2.8   8.4   1.0 120.2  24.9
 3. c3h-backbone.coolideas.co.za           0.0%    24    0.9   0.9   0.9   1.0   0.0
 4. cd-backbone.coolideas.co.za            0.0%    24    1.1   1.1   1.1   1.2   0.0
 5. uoa-cust.coolideas.co.za               0.0%    24  140.7 140.7 140.6 140.9   0.0
 6. 195.66.226.234                         0.0%    24  144.2 143.0 141.7 149.0   1.7
 7. ae1-br01-eqld5.as57976.net             0.0%    24  173.3 161.8 148.8 261.8  25.6
 8. et-0-0-2-br02-eqpa4.as57976.net        0.0%    24  156.8 155.0 149.1 226.0  18.8
 9. be2-pe02-eqpa4.as57976.net             0.0%    24  148.8 148.7 148.6 149.0   0.1
10. 137.221.66.39                          0.0%    24  149.0 149.8 148.7 165.2   3.4
11. 10.109.1.22                            0.0%    24  148.7 149.1 148.5 158.7   2.1
12. 185.60.115.40                          0.0%    24  148.3 148.3 148.2 148.8   0.1
 
joker08 said:
So tempted to click, if I am getting this page why can't I connect to the internet right now. This is the same package I signed up for, so if I click activate it shouldn't be a problem right ?
I just don't want to break anything
c829a6cc4d0b94bd0f305476fb15c13d.jpg
Click to expand...
On trenched you should sign on that link you have the screenshot from.
For the CISP site, you just register an account to the same email address you sign up on shop.vumatel.co.za, then they load the package there after you ordered it on shop.vumatel.co.za
 
And there goes the connection again.... FFS, halfway through a deathmatch every bladdy time....
 
joker08 said:
So tempted to click, if I am getting this page why can't I connect to the internet right now. This is the same package I signed up for, so if I click activate it shouldn't be a problem right ?
I just don't want to break anything
c829a6cc4d0b94bd0f305476fb15c13d.jpg
Click to expand...

Because you are not activated yet you can only reach that Vumatel portal.
Click to activate, it can take from 15 minutes to a few hours.
 
Fjorko said:
@Looney - Try to download this and tell me what speed it comes down at. Then we will try it again later tonight.

http://30.download.real-debrid.com/speedtest/test.rar

This has become a mission for me and I want to find out what the issue is here....

Also - if anyone knows of a buddy out there that has fibre - but not with CISP - give them that link and ask them to report the download speed. Give as much detail as you can i.e

Mine is listed below :

Time: 20:07
Speed Achieved after 2 min: 949KB/s
Test Device: Lenovo Laptop
Wifi/Ethernet: Wireless AC @ 600Mbp/s
ISP: CISP
FLP: Openserve
Package:100/50
Click to expand...
Tested +2min over wifi 2.4ghz
Speed 3.6-4.2Mbps on a 100mb line
 
Tinuva said:
Download winmtr and do a complete trace to see where the packet loss is.
For comparison, I get 0% to that same ip address:
Code: 
Size Range: 28-4470, < 0:random.
Host                                     Loss%   Snt   Last   Avg  Best  Wrst StDev
1. router.lan                             0.0%    25    0.2   0.2   0.1   0.3   0.0
2. 155.93.227.1                           0.0%    25    2.8   8.4   1.0 120.2  24.9
3. c3h-backbone.coolideas.co.za           0.0%    24    0.9   0.9   0.9   1.0   0.0
4. cd-backbone.coolideas.co.za            0.0%    24    1.1   1.1   1.1   1.2   0.0
5. uoa-cust.coolideas.co.za               0.0%    24  140.7 140.7 140.6 140.9   0.0
6. 195.66.226.234                         0.0%    24  144.2 143.0 141.7 149.0   1.7
7. ae1-br01-eqld5.as57976.net             0.0%    24  173.3 161.8 148.8 261.8  25.6
8. et-0-0-2-br02-eqpa4.as57976.net        0.0%    24  156.8 155.0 149.1 226.0  18.8
9. be2-pe02-eqpa4.as57976.net             0.0%    24  148.8 148.7 148.6 149.0   0.1
10. 137.221.66.39                          0.0%    24  149.0 149.8 148.7 165.2   3.4
11. 10.109.1.22                            0.0%    24  148.7 149.1 148.5 158.7   2.1
12. 185.60.115.40                          0.0%    24  148.3 148.3 148.2 148.8   0.1
Click to expand...

Thanks, this is what I'm getting. What would the 192.168.x.x hops be?
Untitled.png
 
nova69 said:
Tested +2min over wifi 2.4ghz
Speed 3.6-4.2Mbps on a 100mb line
Click to expand...

Thanks - must be something wrong with my line coz mine starts out at over 4MB/s then drops all the way back to 400-500K/s
 
Status
Not open for further replies.
Back
Top
Sign up to the MyBroadband newsletter
X