Dashboard for K3805-Z / Customizing VMB for other SIMs

K

khiang

New Member
Joined
May 25, 2011
Messages
7
Reaction score
0
sorry that i don't know where to start, this forum is so big and so many thread

i've just buy vodafone K3805-z usb modem with Vodafone Mobile Connect v9.4 which they lock the software witch specific SIM card, it installed fine but i can't use the dashboard software. It say, in correct SIM card detected...

Is there any dashboard software i can use to replace the VMC Lite? so i can use another type of SIM card i preffered??? kindly advise

sorry for my bad english...

thank you... :confused::confused::confused:
 
Most of the modem Vodacom sells currently comes out with with VMC Lite v10.0 or v10.1.
You can download the full VMC from Vodacom website.
The link: http://help.vodacom.co.za/portal/en...re_downloads&type=Broadband&softdown=Software

As far as I know, the modems that Vodacom sells are locked and can only work with Vodacom Sim.
The only modem that I know of that you could replace the firmware and use any sim you wish was the E220.
Cheers.:)
 
khiang said:
i've just buy vodafone K3805-z usb modem with Vodafone Mobile Connect v9.4 which they lock the software witch specific SIM card, it installed fine but i can't use the dashboard software. It say, in correct SIM card detected...

Is there any dashboard software i can use to replace the VMC Lite? so i can use another type of SIM card i preffered???
Click to expand...
You need to be sure that your modem is not network-locked, if it was bought from Vodacom in South Africa it won't be locked.

The Vodafone modem models with a '-Z' prefix are manufactured by ZTE, and one can find ZTE's Join Air dashboard which works with any operator's SIM card, provided the modem itself is not network-locked. Unfortunately, the K3805-Z uses an Icera chipset and will not work with Join Air (it uses a different set of AT commands).

You can try MDMA, currently only the 1.0.0.31 beta version works with the K3805-Z. It is also possible to modify the Vodafone Mobile Broadband dashboard to support your operator by adding some XML configuration files, as shown here.
 
im sure the modem is not network locked, it only locked by software (VMC lite) as i don't use the VMC to connect, i can create dial up networking under my xp and its work. but problems come again that my live area doesn't covered by 3Gs ignal very well, so i can't choose to use 3G only..

below is programs work with K3805-Z, it can use dashboard to connect, but as i say that it can not lock the signal to 3G only :(

http://softwaredownloads.o2.co.uk/O2Broadband_SoftwareDownloads/Connection_Manager_RC4.5.exe

i hope someone can help me to rebranding the dashboard....
 
ginggs said:
You need to be sure that your modem is not network-locked, if it was bought from Vodacom in South Africa it won't be locked.

The Vodafone modem models with a '-Z' prefix are manufactured by ZTE, and one can find ZTE's Join Air dashboard which works with any operator's SIM card, provided the modem itself is not network-locked. Unfortunately, the K3805-Z uses an Icera chipset and will not work with Join Air (it uses a different set of AT commands).

You can try MDMA, currently only the 1.0.0.31 beta version works with the K3805-Z. It is also possible to modify the Vodafone Mobile Broadband dashboard to support your operator by adding some XML configuration files, as shown here.
Click to expand...

hi Rockhound thanks for your reply, the xml file sample that included is for Opco, i live at Indonesia, is there anyway to edit the xml file to work with my country isp??? thanks in advance
 
khiang said:
hi Rockhound thanks for your reply, the xml file sample that included is for Opco, i live at Indonesia, is there anyway to edit the xml file to work with my country isp??? thanks in advance
Click to expand...
I'm not Rockhound, but anyway, you will need to edit the XML files for your operator by renaming the directory and making changes in some of the files, notepad.exe will do for making the changes. You will need to know the MCC and MNC for your operator, the example was done for Cell-C South Africa; MCC 655 for South Africa and MNC 07 for Cell-C.
 
ginggs said:
I'm not Rockhound, but anyway, you will need to edit the XML files for your operator by renaming the directory and making changes in some of the files, notepad.exe will do for making the changes. You will need to know the MCC and MNC for your operator, the example was done for Cell-C South Africa; MCC 655 for South Africa and MNC 07 for Cell-C.
Click to expand...

oh sorry ginggs, i read and write the wrong name,... i will try to edit the file tonight and will back to you soon...
 
just for update, it works by editing the xml file. it spend my 2 hours to work with it...

will wait for the easier use of dahsboard update ...:p
 
khiang said:
im sure the modem is not network locked, it only locked by software (VMC lite) as i don't use the VMC to connect, i can create dial up networking under my xp and its work. but problems come again that my live area doesn't covered by 3Gs ignal very well, so i can't choose to use 3G only..

below is programs work with K3805-Z, it can use dashboard to connect, but as i say that it can not lock the signal to 3G only :(

http://softwaredownloads.o2.co.uk/O2Broadband_SoftwareDownloads/Connection_Manager_RC4.5.exe

i hope someone can help me to rebranding the dashboard....
Click to expand...

sorry for my previous post, the O2 software manager can choose the signal 3G/GPRS by selecting general menu and choose the network mannually... :D
 
hi,
i am living in surabaya, could you send me the xml file for telkomsel??

thanks
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X