Fix the inf files and PNF files can not remove when the driver uninstalled.
Add new PID 155B and 151A,151B,151C,151D,151E,151F.
Add a request to set the MTU size for NDIS driver.
Fixed an issue that K4605 can not check the SIM card when PIN is locked in Win7.
Support dual mode feature.
Fix the issue that driver returns incorrect response status to vendor specific mode selection order command.
Fix the issue that failed to get IP address after restart dashboard or PC.
Add Jungo baseline.
Support dual mode feature.
Add parameter "-f2" to create and delete log file.
Add power state command from S0 to S0 when system startup or reboot.
note: This version is based on version 4.23.05.00
Fix the issue that failed to connect to network in dual mode .
Fix two jungo wwan issues.
Fix the issue that crash in intialize.
Support more download speed display.
note: This version is based on version 4.24.00.00
Add the support for new pid of 156A,156B,156C,156D,156E,156F.
Add the new MODEM port name, with matched with protocol 0x17 for Orange on J platform.
Add a new feature for setting register mode with WWAN(VDF requirement).
Add the new port name without "HUAWEI" on J platform.
Fix the issue that not support 5s suspend on J platform.
Fix the issue that cant use SDT tool on J platform.
Fix the issue that packet lost in NDIS driver on J platform.
Fix the issue that EVDO mode can't show signal on WWAN.
Fix the issue that in manual registration.
Fix the issue that VMB can't display right option in "Bearer".
Fix the issue that attemptsRemaining when entering pin with wwantestapp.
Fix the issue that HEADER doesn't intialize when querying OID_WWAN_SIGNAL_STATE with wwantestapp.
note: This version is based on version 4.24.01.00
Fix the issue that failed to open web by wwan.
Fix the issue that wwan driver initialize delay.
Add a new feature for QUALCOMM WWAN setting static NBNS.
note: This version is based on version 4.24.02.00
Support IPV6 feature for NDIS driver both in Qualcomm and Jungo.
note: This version is based on version 4.24.03.00
Support AT^EONS for dispaly register name in UCS2.
Add new PID information.
Fix the issue that WWAN visible provider display incorrect.
Fix the issue that WWAN driver can't hanlde multi-inications from UE
Fix the issue that set register mode failed.
Fix the issue that can't support UNICODE charset in WWAN page.
note: This version is based on version 4.25.00.00
Fix the issue that busenum.sys can't be loaded with newest pid info
Fix the issue that at response parsing problem in infineon platform
Fix the issue that IPV6 DNS can't be acquired in E5 products
Fix the issue that the auto listening is disabled in modem dialing process
Fix the issue that IPV6 primary and secondary dns's order are not correct
Fix the issue that LTE submode can't be displayed in Jungo Driver
Add the feature that driver informs acm port status to device
Fix the issue that wwan state abnormal with device that can't handle at^syscfgex? correctly
Add the feature that support wwan driver's OID read unicode MMS through cdma datacard
Add the feature that disable wwan sms function according to registry config in J and Q platform.
Fix the issue that still indicating RSSI after removing sim card.
note: This version is based on version 4.25.01.00
Fix the issue that connecting vpn failed in k3770
Fix the issue that remaining pin times when input error pin codes in k3806 and e369
Fix the issue that k3806 update airplane icon failure in Win8 OS
Fix the issue that driver can't handle ^ltersrp indication in E3276
Fix the issue that K4605 fail to connect network in win7
note: This version is based on version 4.25.04.00
Fix the issue that connection speed not correct in LTE mode(E3276)
note: This version is based on version 4.25.06.00
Fix the issue that wwan cann't connnect when back to network again in Win8 in Q and J platform.
Support ports name without "HUAWEI".
Fix the issue that crash in WLK1.6 authentication with MC607 module.
Add the passby of not obtain provider name and ICCID in win8.
note: This version is based on version 4.25.07.00
Fix the issue that wwan driver can't be unloaded in low power mode in Q platform.
note: This version is based on version 4.25.08.00