South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
andres101 said:Not sure about the CellC modem, but this is how it is usually done.
Install the driver that came with the device. There is usually a CD with a setup.exe program on.
After installing the driver, shut down your PC and insert the device. Now power your PC back up and Windows should detect the new hardware and install the driver.
Did the device not come with a manual?
Hope this helps.
andres101 said:you can use your current contract for GPRS/EDGE. no need for "pre paid", the costs will be included in your monthly bill.
my GPRS/EDGE card cost around R1400...
lin_ux said:Hi
You can use the modem with any network provider.
C for yourself said:Hi All
To clarify some points above:
1) Yes the Cell C mobile USB modem is network locked. It will work on Cell C and Virgin Mobile but not MTN and Vodacom
2) Cell C offers 6 smartdata options. The smartdata standard option discussed above is a general provisioning and carries no monthly cost. Data is charged in 1KB increments at R2 per MB and smartdata standard is available to all new or existing prepaid, contract and controlchat customers. Cell C also offer the following data bundles for contract customers: 25MB @ R39pm, 100MB @ R100pm, 200MB at R175pm, 500MB @ R350pm and 1GB @ R499pm.
3) All the above bundles are also available as either 1, 12, or 24 month contracts.
4) To activate smartdata standard please SMS the word "smartdata" to 0841559911 or select the activate button on the Airtime Tab of the USB modem dashboard. You can also contact customer care on 140. A billable call is required on all new lines before smartdata can be activated.
Cheers
C for yourself