170 packets, so that test didn't even get off the ground to start off with. It should test to the local node. With borderless on it won't do that unless you setup some static routing so only way to test and rule out gremlins from another network is to switch off borderless.
ok I see it's going to a JNB node now...
UPLOAD SPEED
76.58 Mb/s
DOWNLOAD SPEED
96.53 Mb/s
Network latency: 3 msec round trip time
Jitter: 58 msec
Your system: -
Plugin version: - (-)
TCP receive window: 112384 current, 353280 maximum
0.11 % of packets lost during test
Round trip time: 1 msec (minimum), 59 msec (maximum), 3 msec (average)
Jitter: -
0.00 seconds spend waiting following a timeout
TCP time-out counter: 203
3015 selective acknowledgement packets received
No duplex mismatch condition was detected.
The test did not detect a cable fault.
No network congestion was detected.
0.8781 % of the time was not spent in a receiver limited or sender limited state.
0.0669 % of the time the connection is limited by the client machine's receive buffer.
Optimal receive buffer: - bytes
Bottleneck link: -
2794 duplicate ACKs set