Home-Connect ISP Feedback

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
Update: Home-connect are sending out a techie to my residence next week sometime, to do some onsite trouble shooting...
Update: It was deemed not necessary to do an onsite inspection/test. Really, trouble shooting seems to have stalled. I've prompted for feedback regarding iperf anomaly. None forthcoming. Prompted for feedback for poor international. No feedback and/or change of any substance... I can see where this is going. Will give it till the end of the month and decide from there...
 

cavedog

Honorary Master
Joined
Oct 19, 2007
Messages
13,731
Update: It was deemed not necessary to do an onsite inspection/test. Really, trouble shooting seems to have stalled. I've prompted for feedback regarding iperf anomaly. None forthcoming. Prompted for feedback for poor international. No feedback and/or change of any substance... I can see where this is going. Will give it till the end of the month and decide from there...
I'm kind off in the same deadlock with Supersonic. Clear IPC congestion and they deny it but I guess it's too complicated for first line support to understand. I just hope they have a pending order with Openserve wholesale to upgrade the IPC or I'm going to have to jump ship. I will wait until end of Feb maybe March then I'm jumping.
 

macedon

Well-Known Member
Joined
Dec 15, 2010
Messages
144
Same issue here my latency to international servers is through the roof and speeds are like 3-4mbps on a 200mbps fibre line. I did call them and they were like surprised and asked me some stupid questions like connect to your CPE unit and test from there, even though I told them my local speeds are fine.

From my experience this started on Wednesday afternoon after their network maintenance, my connection has been up and down since then.

I suggest open a support ticket as well so that they are aware that many clients are affected.
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
I've been trouble shooting my international for the last 3 weeks with a Home-connect support agent as well as the GM. I've mailed test results through to Thabiso Zulu and Tamara Al-Halaseh (GM) this morning around 9h20.

What area are you in @macedon ?
 

macedon

Well-Known Member
Joined
Dec 15, 2010
Messages
144
I've been trouble shooting my international for the last 3 weeks with a Home-connect support agent as well as the GM. I've mailed test results through to Thabiso Zulu and Tamara Al-Halaseh (GM) this morning around 9h20.

What area are you in @macedon ?
Weltevreden Park on Vumatel Fibre.
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
Weltevreden Park on Vumatel Fibre.
So my international 'normalized' around 12h30 today.

Still way below par for a 1gb account and that's why I been trouble shooting with HC for the last 3 weeks, but this morning it was completely unusable.


Edit los Angeles xfernet

 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
So the feedback I'm getting from Home-connect re my nonsensical iperf test results is that it is basically due to an iperf tool bug or limitation. WTF?? This makes absolutely no sense to me whatsoever... Also considering the tests are conducted to a local server.

This thread indicates that iperf reports out of order packets as lost ( https://github.com/esnet/iperf/issues/457 ), even though UDP packets being received out of order in a high speed test between London and JHB are to be expected with a connection-less protocol like UDP.
Although it was planned to be resolved in 3.2, the evidence suggests that this is not yet the case.
I did a number of tests (see attached example) where the throughput reported by iperf seemed to indicate that I was getting only half of the 500Mbps that I was trying to achieve, and the percentage packet loss was in line with the reduced throughput being reported, however watching the throughput on the NIC of the testing machine indicated that I was getting consistent throughput of 500Mbps, thereby supporting my contention that the reported UDP loss issue has not yet been resolved.
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
Using the same pc and iperf version to test but connected to my MTN LTE account here in the speed test and iperf test results, configured to run at 40Mbps (in line with the throughput my MTN LTE account can handle).

https://www.speedtest.net/result/8037039726

Microsoft Windows [Version 10.0.17763.316]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>iperf3.exe -R -u -b 40M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.42.179 port 64784 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 4.78 MBytes 40.0 Mbits/sec 0.852 ms 11/3442 (0.32%)
[ 5] 1.00-2.00 sec 4.77 MBytes 40.1 Mbits/sec 0.954 ms 2/3427 (0.058%)
[ 5] 2.00-3.00 sec 4.71 MBytes 39.5 Mbits/sec 1.752 ms 0/3381 (0%)
[ 5] 3.00-4.00 sec 4.88 MBytes 40.7 Mbits/sec 0.562 ms 0/3505 (0%)
[ 5] 4.00-5.00 sec 4.71 MBytes 39.7 Mbits/sec 0.653 ms 0/3386 (0%)
[ 5] 5.00-6.00 sec 4.80 MBytes 40.3 Mbits/sec 0.451 ms 0/3447 (0%)
[ 5] 6.00-7.00 sec 2.43 MBytes 20.4 Mbits/sec 0.663 ms 1/1746 (0.057%)
[ 5] 7.00-8.00 sec 1.85 MBytes 15.5 Mbits/sec 2.063 ms 160/1489 (11%)
[ 5] 8.00-9.00 sec 2.21 MBytes 18.6 Mbits/sec 2.609 ms 2009/3599 (56%)
[ 5] 9.00-10.00 sec 6.58 MBytes 55.2 Mbits/sec 0.540 ms 149/4876 (3.1%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.21 sec 48.7 MBytes 40.0 Mbits/sec 0.000 ms 0/34960 (0%) sender
[ 5] 0.00-10.00 sec 41.7 MBytes 35.0 Mbits/sec 0.540 ms 2332/32298 (7.2%) receiver


iperf Done.

C:\WINDOWS\system32>iperf3.exe -u -b 40M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.42.179 port 59742 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.06 sec 1.58 MBytes 12.5 Mbits/sec 1135
[ 5] 1.06-2.06 sec 1.26 MBytes 10.6 Mbits/sec 903
[ 5] 2.06-3.01 sec 1.27 MBytes 11.2 Mbits/sec 911
[ 5] 3.01-4.10 sec 1.30 MBytes 9.99 Mbits/sec 932
[ 5] 4.10-5.08 sec 1021 KBytes 8.56 Mbits/sec 716
[ 5] 5.08-6.01 sec 1.12 MBytes 10.1 Mbits/sec 804
[ 5] 6.01-7.08 sec 1.28 MBytes 10.0 Mbits/sec 920
[ 5] 7.08-8.00 sec 1.17 MBytes 10.7 Mbits/sec 842
[ 5] 8.00-9.03 sec 1.18 MBytes 9.61 Mbits/sec 846
[ 5] 9.03-10.00 sec 1.15 MBytes 9.99 Mbits/sec 828
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 12.3 MBytes 10.3 Mbits/sec 0.000 ms 0/8837 (0%) sender
[ 5] 0.00-10.46 sec 12.3 MBytes 9.87 Mbits/sec 1.626 ms 0/8837 (0%) receiver


iperf Done.

C:\WINDOWS\system32>

If I run the same tests connected to 1Gbps fibre using the same 40Mbps parameters the results reflect massive packet loss!!! This shouldn’t be the case, especially not at 40Mbps when the line has a throughput capacity in excess of 900Mbps!!!! THERE IS A PROBLEM WITH THE LINE!!!

C:\WINDOWS\system32>iperf3.exe -R -u -b 40M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 61346 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 2.65 MBytes 22.2 Mbits/sec 0.077 ms 1646/3546 (46%)
[ 5] 1.00-2.00 sec 1.28 MBytes 10.7 Mbits/sec 0.097 ms 2508/3425 (73%)
[ 5] 2.00-3.00 sec 1.27 MBytes 10.6 Mbits/sec 0.089 ms 2515/3425 (73%)
[ 5] 3.00-4.00 sec 1.27 MBytes 10.7 Mbits/sec 0.083 ms 2510/3424 (73%)
[ 5] 4.00-5.00 sec 1.27 MBytes 10.6 Mbits/sec 0.091 ms 2513/3425 (73%)
[ 5] 5.00-6.00 sec 1.26 MBytes 10.6 Mbits/sec 0.058 ms 2516/3424 (73%)
[ 5] 6.00-7.00 sec 1.27 MBytes 10.7 Mbits/sec 0.083 ms 2513/3425 (73%)
[ 5] 7.00-8.00 sec 1.26 MBytes 10.6 Mbits/sec 0.093 ms 2519/3425 (74%)
[ 5] 8.00-9.00 sec 1.27 MBytes 10.6 Mbits/sec 0.076 ms 2513/3425 (73%)
[ 5] 9.00-10.00 sec 1.28 MBytes 10.7 Mbits/sec 0.095 ms 2509/3425 (73%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.20 sec 48.6 MBytes 40.0 Mbits/sec 0.000 ms 0/34939 (0%) sender
[ 5] 0.00-10.00 sec 14.1 MBytes 11.8 Mbits/sec 0.095 ms 24262/34369 (71%) receiver


iperf Done.

C:\WINDOWS\system32>iperf3.exe -u -b 40M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.1.147 port 52078 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 4.77 MBytes 40.0 Mbits/sec 3425
[ 5] 1.00-2.00 sec 4.76 MBytes 40.0 Mbits/sec 3422
[ 5] 2.00-3.00 sec 4.77 MBytes 40.0 Mbits/sec 3425
[ 5] 3.00-4.00 sec 4.77 MBytes 40.0 Mbits/sec 3426
[ 5] 4.00-5.00 sec 4.77 MBytes 40.0 Mbits/sec 3423
[ 5] 5.00-6.00 sec 4.77 MBytes 40.0 Mbits/sec 3425
[ 5] 6.00-7.00 sec 4.77 MBytes 40.0 Mbits/sec 3426
[ 5] 7.00-8.00 sec 4.77 MBytes 40.0 Mbits/sec 3425
[ 5] 8.00-9.00 sec 4.77 MBytes 40.0 Mbits/sec 3423
[ 5] 9.00-10.00 sec 4.77 MBytes 40.0 Mbits/sec 3425
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 47.7 MBytes 40.0 Mbits/sec 0.000 ms 0/34245 (0%) sender
[ 5] 0.00-10.20 sec 15.3 MBytes 12.6 Mbits/sec 0.175 ms 23236/34235 (68%) receiver


iperf Done.

C:\WINDOWS\system32>
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
@websquadza is my methodology above sound? I'm trying to make a like for like comparison to negate the argument that the iperf test result anomaly is based on a software bug in iperf!!
 

wingnut771

Executive Member
Joined
Feb 15, 2011
Messages
5,711
Got home at 4:30pm, went to shop.vumatel (i had a router), selected 50/50 websquad, 5:30pm got an email from vuma saying I'm connected.

Over wifi:

C:\\Compressed\iperf-3.1.3-win64\iperf-3
.1.3-win64\iperf3.exe -u -b 40M -p 17001 -c queen.cisp.co.za
Connecting to host queen.cisp.co.za, port 17001
[ 4] local 192.168.0.100 port 64887 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-1.00 sec 4.48 MBytes 37.5 Mbits/sec 573
[ 4] 1.00-2.00 sec 4.76 MBytes 39.9 Mbits/sec 609
[ 4] 2.00-3.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 3.00-4.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 4.00-5.00 sec 4.80 MBytes 40.2 Mbits/sec 614
[ 4] 5.00-6.00 sec 4.73 MBytes 39.7 Mbits/sec 606
[ 4] 6.00-7.00 sec 4.77 MBytes 40.0 Mbits/sec 610
[ 4] 7.00-8.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 8.00-9.00 sec 4.79 MBytes 40.2 Mbits/sec 613
[ 4] 9.00-10.00 sec 4.75 MBytes 39.8 Mbits/sec 608
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 47.4 MBytes 39.8 Mbits/sec 0.906 ms 0/6065 (0%)
[ 4] Sent 6065 datagrams

iperf Done.

C:\Users\\Compressed\iperf-3.1.3-win64\iperf-3
.1.3-win64\iperf3.exe -R -u -b 40M -p 17001 -c queen.cisp.co.za
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 4] local 192.168.0.100 port 56347 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-1.00 sec 4.97 MBytes 41.7 Mbits/sec 0.046 ms 94/730 (13%)
[ 4] 1.00-2.00 sec 4.77 MBytes 40.0 Mbits/sec 0.633 ms 0/611 (0%)
[ 4] 2.00-3.00 sec 4.77 MBytes 40.0 Mbits/sec 0.134 ms 0/610 (0%)
[ 4] 3.00-4.00 sec 4.77 MBytes 40.0 Mbits/sec 0.130 ms 0/611 (0%)
[ 4] 4.00-5.00 sec 4.77 MBytes 40.0 Mbits/sec 0.059 ms 0/610 (0%)
[ 4] 5.00-6.00 sec 4.77 MBytes 40.0 Mbits/sec 0.028 ms 0/610 (0%)
[ 4] 6.00-7.00 sec 4.77 MBytes 40.0 Mbits/sec 0.094 ms 0/611 (0%)
[ 4] 7.00-8.00 sec 4.77 MBytes 40.0 Mbits/sec 0.009 ms 0/610 (0%)
[ 4] 8.00-9.00 sec 4.77 MBytes 40.0 Mbits/sec 0.055 ms 0/610 (0%)
[ 4] 9.00-10.00 sec 4.77 MBytes 40.0 Mbits/sec 0.040 ms 0/611 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 49.4 MBytes 41.5 Mbits/sec 0.028 ms 94/6329 (1.5%)

[ 4] Sent 6329 datagrams

iperf Done.

Untitled.png

Untitled.png
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
Got home at 4:30pm, went to shop.vumatel (i had a router), selected 50/50 websquad, 5:30pm got an email from vuma saying I'm connected.

Over wifi:

C:\\Compressed\iperf-3.1.3-win64\iperf-3
.1.3-win64\iperf3.exe -u -b 40M -p 17001 -c queen.cisp.co.za
Connecting to host queen.cisp.co.za, port 17001
[ 4] local 192.168.0.100 port 64887 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-1.00 sec 4.48 MBytes 37.5 Mbits/sec 573
[ 4] 1.00-2.00 sec 4.76 MBytes 39.9 Mbits/sec 609
[ 4] 2.00-3.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 3.00-4.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 4.00-5.00 sec 4.80 MBytes 40.2 Mbits/sec 614
[ 4] 5.00-6.00 sec 4.73 MBytes 39.7 Mbits/sec 606
[ 4] 6.00-7.00 sec 4.77 MBytes 40.0 Mbits/sec 610
[ 4] 7.00-8.00 sec 4.77 MBytes 40.0 Mbits/sec 611
[ 4] 8.00-9.00 sec 4.79 MBytes 40.2 Mbits/sec 613
[ 4] 9.00-10.00 sec 4.75 MBytes 39.8 Mbits/sec 608
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 47.4 MBytes 39.8 Mbits/sec 0.906 ms 0/6065 (0%)
[ 4] Sent 6065 datagrams

iperf Done.

C:\Users\\Compressed\iperf-3.1.3-win64\iperf-3
.1.3-win64\iperf3.exe -R -u -b 40M -p 17001 -c queen.cisp.co.za
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 4] local 192.168.0.100 port 56347 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-1.00 sec 4.97 MBytes 41.7 Mbits/sec 0.046 ms 94/730 (13%)
[ 4] 1.00-2.00 sec 4.77 MBytes 40.0 Mbits/sec 0.633 ms 0/611 (0%)
[ 4] 2.00-3.00 sec 4.77 MBytes 40.0 Mbits/sec 0.134 ms 0/610 (0%)
[ 4] 3.00-4.00 sec 4.77 MBytes 40.0 Mbits/sec 0.130 ms 0/611 (0%)
[ 4] 4.00-5.00 sec 4.77 MBytes 40.0 Mbits/sec 0.059 ms 0/610 (0%)
[ 4] 5.00-6.00 sec 4.77 MBytes 40.0 Mbits/sec 0.028 ms 0/610 (0%)
[ 4] 6.00-7.00 sec 4.77 MBytes 40.0 Mbits/sec 0.094 ms 0/611 (0%)
[ 4] 7.00-8.00 sec 4.77 MBytes 40.0 Mbits/sec 0.009 ms 0/610 (0%)
[ 4] 8.00-9.00 sec 4.77 MBytes 40.0 Mbits/sec 0.055 ms 0/610 (0%)
[ 4] 9.00-10.00 sec 4.77 MBytes 40.0 Mbits/sec 0.040 ms 0/611 (0%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datag
rams
[ 4] 0.00-10.00 sec 49.4 MBytes 41.5 Mbits/sec 0.028 ms 94/6329 (1.5%)

[ 4] Sent 6329 datagrams

iperf Done.

View attachment 619398

View attachment 619404
Nice man!! Congratz!! Today was the day?!!

Those are decent results! Iperf test machine? Windows based? Bandwidth place test results are consistently shite for me, CISP or home-connect, didn't make a difference...
 

wingnut771

Executive Member
Joined
Feb 15, 2011
Messages
5,711
Nice man!! Congratz!! Today was the day?!!

Those are decent results! Iperf test machine? Windows based? Bandwidth place test results are consistently shite for me, CISP or home-connect, didn't make a difference...
Fibre got installed the day I was flying out to Cape Town for a weeks holiday, got back to Durban today.
Tests were on my win 7 pro 64bit HP laptop sitting in bed connected to 5ghz wifi.

If you need me to do any more tests, let me know.
 

sand_man

Honorary Master
Joined
Jun 4, 2005
Messages
28,671
So there hasn't been much to report back on! Nothing has changed re my poor performing international and/or iperf anomaly. The case is still open and being investigated but no concrete feedback apparently.... Just over a month now, since the ticket was opened.

Here in international speed tests multi thread as well as single thread, Home-connect 1Gbps fibre account!! 20th February 2019, 9h15

London International school of London multi

https://www.speedtest.net/result/8054697345

single

https://www.speedtest.net/result/8054704796

Los Angeles AT&T multi

https://www.speedtest.net/result/8054699245

single

https://www.speedtest.net/result/8054706654

Local multi

https://www.speedtest.net/result/8054701169

single

https://www.speedtest.net/result/8054703031

testmy.net

https://testmy.net/CcVlfdGhp.png

dslreports

http://www.dslreports.com/speedtest/46302809

All tests are wired, Cat6 ethernet cables to both PC/Router and Router to ONT. Windows 10 on the test server.

Iperf test results, 160M so optimized for a 200Mbps line and not a 1Gbps line.

Microsoft Windows [Version 10.0.17763.316]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>iperf3.exe -R -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 50627 connected to 62.233.65.195 port 17001
iperf3: error - control socket has closed unexpectedly

C:\WINDOWS\system32>iperf3.exe -R -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 50628 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 2.07 MBytes 17.3 Mbits/sec 0.096 ms 12664/14149 (90%)
[ 5] 1.00-2.00 sec 1.26 MBytes 10.5 Mbits/sec 0.066 ms 12800/13702 (93%)
[ 5] 2.00-3.00 sec 1.27 MBytes 10.7 Mbits/sec 0.100 ms 12785/13698 (93%)
[ 5] 3.00-4.00 sec 1.26 MBytes 10.6 Mbits/sec 0.091 ms 12789/13696 (93%)
[ 5] 4.00-5.00 sec 1.25 MBytes 10.5 Mbits/sec 0.069 ms 12803/13699 (93%)
[ 5] 5.00-6.00 sec 1.26 MBytes 10.6 Mbits/sec 0.075 ms 12797/13701 (93%)
[ 5] 6.00-7.00 sec 1.26 MBytes 10.6 Mbits/sec 0.081 ms 12789/13696 (93%)
[ 5] 7.00-8.00 sec 1.24 MBytes 10.4 Mbits/sec 0.090 ms 12806/13699 (93%)
[ 5] 8.00-9.00 sec 1.25 MBytes 10.5 Mbits/sec 0.073 ms 12797/13698 (93%)
[ 5] 9.00-10.00 sec 1.26 MBytes 10.6 Mbits/sec 0.101 ms 12793/13699 (93%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.20 sec 195 MBytes 160 Mbits/sec 0.000 ms 0/139757 (0%) sender
[ 5] 0.00-10.00 sec 13.4 MBytes 11.2 Mbits/sec 0.101 ms 127823/137437 (93%) receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.1.147 port 54594 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 19.1 MBytes 160 Mbits/sec 13693
[ 5] 1.00-2.00 sec 19.1 MBytes 160 Mbits/sec 13697
[ 5] 2.00-3.00 sec 19.1 MBytes 160 Mbits/sec 13687
[ 5] 3.00-4.00 sec 19.1 MBytes 160 Mbits/sec 13714
[ 5] 4.00-5.00 sec 19.1 MBytes 160 Mbits/sec 13697
[ 5] 5.00-6.00 sec 19.1 MBytes 160 Mbits/sec 13698
[ 5] 6.00-7.00 sec 19.1 MBytes 160 Mbits/sec 13701
[ 5] 7.00-8.00 sec 19.1 MBytes 160 Mbits/sec 13696
[ 5] 8.00-9.00 sec 19.1 MBytes 160 Mbits/sec 13694
[ 5] 9.00-10.00 sec 19.1 MBytes 160 Mbits/sec 13701
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 191 MBytes 160 Mbits/sec 0.000 ms 0/136978 (0%) sender
[ 5] 0.00-10.20 sec 14.8 MBytes 12.2 Mbits/sec 0.288 ms 126192/136856 (92%) receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -R -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 54852 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.18 MBytes 9.86 Mbits/sec
[ 5] 1.00-2.00 sec 3.97 MBytes 33.3 Mbits/sec
[ 5] 2.00-3.00 sec 4.49 MBytes 37.6 Mbits/sec
[ 5] 3.00-4.00 sec 4.86 MBytes 40.8 Mbits/sec
[ 5] 4.00-5.00 sec 3.91 MBytes 32.8 Mbits/sec
[ 5] 5.00-6.00 sec 3.87 MBytes 32.4 Mbits/sec
[ 5] 6.00-7.00 sec 4.08 MBytes 34.2 Mbits/sec
[ 5] 7.00-8.00 sec 4.20 MBytes 35.3 Mbits/sec
[ 5] 8.00-9.00 sec 4.27 MBytes 35.8 Mbits/sec
[ 5] 9.00-10.00 sec 4.29 MBytes 36.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.16 sec 40.4 MBytes 33.3 Mbits/sec 257 sender
[ 5] 0.00-10.00 sec 39.1 MBytes 32.8 Mbits/sec receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.1.147 port 54870 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 384 KBytes 3.14 Mbits/sec
[ 5] 1.00-2.00 sec 13.9 MBytes 116 Mbits/sec
[ 5] 2.00-3.00 sec 768 KBytes 6.29 Mbits/sec
[ 5] 3.00-4.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 4.00-5.00 sec 6.75 MBytes 56.6 Mbits/sec
[ 5] 5.00-6.00 sec 10.2 MBytes 85.9 Mbits/sec
[ 5] 6.00-7.00 sec 9.50 MBytes 79.7 Mbits/sec
[ 5] 7.00-8.00 sec 9.75 MBytes 81.8 Mbits/sec
[ 5] 8.00-9.00 sec 10.1 MBytes 85.0 Mbits/sec
[ 5] 9.00-10.00 sec 10.6 MBytes 89.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 72.2 MBytes 60.6 Mbits/sec sender
[ 5] 0.00-10.17 sec 66.1 MBytes 54.5 Mbits/sec receiver

iperf Done.
 

wingnut771

Executive Member
Joined
Feb 15, 2011
Messages
5,711
So there hasn't been much to report back on! Nothing has changed re my poor performing international and/or iperf anomaly. The case is still open and being investigated but no concrete feedback apparently.... Just over a month now, since the ticket was opened.

Here in international speed tests multi thread as well as single thread, Home-connect 1Gbps fibre account!! 20th February 2019, 9h15

London International school of London multi

https://www.speedtest.net/result/8054697345

single

https://www.speedtest.net/result/8054704796

Los Angeles AT&T multi

https://www.speedtest.net/result/8054699245

single

https://www.speedtest.net/result/8054706654

Local multi

https://www.speedtest.net/result/8054701169

single

https://www.speedtest.net/result/8054703031

testmy.net

https://testmy.net/CcVlfdGhp.png

dslreports

http://www.dslreports.com/speedtest/46302809

All tests are wired, Cat6 ethernet cables to both PC/Router and Router to ONT. Windows 10 on the test server.

Iperf test results, 160M so optimized for a 200Mbps line and not a 1Gbps line.

Microsoft Windows [Version 10.0.17763.316]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>iperf3.exe -R -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 50627 connected to 62.233.65.195 port 17001
iperf3: error - control socket has closed unexpectedly

C:\WINDOWS\system32>iperf3.exe -R -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 50628 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 2.07 MBytes 17.3 Mbits/sec 0.096 ms 12664/14149 (90%)
[ 5] 1.00-2.00 sec 1.26 MBytes 10.5 Mbits/sec 0.066 ms 12800/13702 (93%)
[ 5] 2.00-3.00 sec 1.27 MBytes 10.7 Mbits/sec 0.100 ms 12785/13698 (93%)
[ 5] 3.00-4.00 sec 1.26 MBytes 10.6 Mbits/sec 0.091 ms 12789/13696 (93%)
[ 5] 4.00-5.00 sec 1.25 MBytes 10.5 Mbits/sec 0.069 ms 12803/13699 (93%)
[ 5] 5.00-6.00 sec 1.26 MBytes 10.6 Mbits/sec 0.075 ms 12797/13701 (93%)
[ 5] 6.00-7.00 sec 1.26 MBytes 10.6 Mbits/sec 0.081 ms 12789/13696 (93%)
[ 5] 7.00-8.00 sec 1.24 MBytes 10.4 Mbits/sec 0.090 ms 12806/13699 (93%)
[ 5] 8.00-9.00 sec 1.25 MBytes 10.5 Mbits/sec 0.073 ms 12797/13698 (93%)
[ 5] 9.00-10.00 sec 1.26 MBytes 10.6 Mbits/sec 0.101 ms 12793/13699 (93%)
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.20 sec 195 MBytes 160 Mbits/sec 0.000 ms 0/139757 (0%) sender
[ 5] 0.00-10.00 sec 13.4 MBytes 11.2 Mbits/sec 0.101 ms 127823/137437 (93%) receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -u -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.1.147 port 54594 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec 19.1 MBytes 160 Mbits/sec 13693
[ 5] 1.00-2.00 sec 19.1 MBytes 160 Mbits/sec 13697
[ 5] 2.00-3.00 sec 19.1 MBytes 160 Mbits/sec 13687
[ 5] 3.00-4.00 sec 19.1 MBytes 160 Mbits/sec 13714
[ 5] 4.00-5.00 sec 19.1 MBytes 160 Mbits/sec 13697
[ 5] 5.00-6.00 sec 19.1 MBytes 160 Mbits/sec 13698
[ 5] 6.00-7.00 sec 19.1 MBytes 160 Mbits/sec 13701
[ 5] 7.00-8.00 sec 19.1 MBytes 160 Mbits/sec 13696
[ 5] 8.00-9.00 sec 19.1 MBytes 160 Mbits/sec 13694
[ 5] 9.00-10.00 sec 19.1 MBytes 160 Mbits/sec 13701
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-10.00 sec 191 MBytes 160 Mbits/sec 0.000 ms 0/136978 (0%) sender
[ 5] 0.00-10.20 sec 14.8 MBytes 12.2 Mbits/sec 0.288 ms 126192/136856 (92%) receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -R -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
Reverse mode, remote host queen.cisp.co.za is sending
[ 5] local 192.168.1.147 port 54852 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 1.18 MBytes 9.86 Mbits/sec
[ 5] 1.00-2.00 sec 3.97 MBytes 33.3 Mbits/sec
[ 5] 2.00-3.00 sec 4.49 MBytes 37.6 Mbits/sec
[ 5] 3.00-4.00 sec 4.86 MBytes 40.8 Mbits/sec
[ 5] 4.00-5.00 sec 3.91 MBytes 32.8 Mbits/sec
[ 5] 5.00-6.00 sec 3.87 MBytes 32.4 Mbits/sec
[ 5] 6.00-7.00 sec 4.08 MBytes 34.2 Mbits/sec
[ 5] 7.00-8.00 sec 4.20 MBytes 35.3 Mbits/sec
[ 5] 8.00-9.00 sec 4.27 MBytes 35.8 Mbits/sec
[ 5] 9.00-10.00 sec 4.29 MBytes 36.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.16 sec 40.4 MBytes 33.3 Mbits/sec 257 sender
[ 5] 0.00-10.00 sec 39.1 MBytes 32.8 Mbits/sec receiver

iperf Done.

C:\WINDOWS\system32>iperf3.exe -b 160M -p 17001 -c queen.cisp.co.za
warning: Ignoring nonsense TCP MSS 0
Connecting to host queen.cisp.co.za, port 17001
[ 5] local 192.168.1.147 port 54870 connected to 62.233.65.195 port 17001
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 384 KBytes 3.14 Mbits/sec
[ 5] 1.00-2.00 sec 13.9 MBytes 116 Mbits/sec
[ 5] 2.00-3.00 sec 768 KBytes 6.29 Mbits/sec
[ 5] 3.00-4.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 4.00-5.00 sec 6.75 MBytes 56.6 Mbits/sec
[ 5] 5.00-6.00 sec 10.2 MBytes 85.9 Mbits/sec
[ 5] 6.00-7.00 sec 9.50 MBytes 79.7 Mbits/sec
[ 5] 7.00-8.00 sec 9.75 MBytes 81.8 Mbits/sec
[ 5] 8.00-9.00 sec 10.1 MBytes 85.0 Mbits/sec
[ 5] 9.00-10.00 sec 10.6 MBytes 89.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 72.2 MBytes 60.6 Mbits/sec sender
[ 5] 0.00-10.17 sec 66.1 MBytes 54.5 Mbits/sec receiver

iperf Done.
Have you tried tcpoptimizer 4
 
Top