bdt
Executive Member
Hi Sam, thanks for the speedy reply.
TIA.
Okay, that's something to look at, thank you.1) The selection of primary Internet interface is done on that page, yes. However, for the fail-over to work, you must configure it accordingly in the Connection Tracker: https://www.dropbox.com/s/r5u5c4efdzemczo/CT failover.png
Okay, then it looks like we're going to have to go with plan-B: feeding the Ethernet-only (it's a desktop modem) iBurst into as basic a router as I can and let that do the PPPoE, and then daisy-chain to the WAN port on the Dovado so it can see the expected DHCP. So, assuming I get the connection tracker to work as shown, is that a config I can expect to work?2) PPPoE is not available in our routers, as you pointed out. We had however have support for iBurst USB modems directly a few years ago in the DOVADO UMR, but this product is no longer available. iBurst alike was not something we saw too much a future in, so we decided to shift all of our attention on 4G/LTE and 3G/UMTS.
We will with high likelihood add support for PPPoE, but I cannot provide a time-plan on that. Very few countries still use this, and even less use it for the purpose of mobile broadband. It is mostly used for fixed broadband.
TIA.